Flux-cored wire for surfacing of TM.WELTEC Ltd.

1. Product name
2. The Formation of the weld bead
3. Separation of Slag
4. Deposition Rate, kg/h
5. Addiction Weld metal Cracking
6. Consumption per 1 kg of wire Weld metal, kg
7. Weld metal Hardness (HRC for 3rd-4th layer, unless otherwise stated)

1	2	3	4	5	6	7
WELTEC_H377_O			-			after surfacing -
WELTEC_H577_O			-			after surfacing -
WELTEC_H475_O			-			after surfacing -
WELTEC_H365_O			-			after surfacing -
WELTEC_H215surf			-			after surfacing HB 180-HB 240 after work hardening 36-40
WELTEC_H237_O			-			after surfacing -
WELTEC_H555_O			-			after surfacing -
WELTEC_H615_O			-			after surfacing -
WELTEC_H495_O			-			after surfacing -
WELTEC-H216-01			-			after surfacing HB 200-HB 220 after work hardening 36-40
WELTEC_H634	good	good, solid crust no	2-12	increased	1.1-1.2	after surfacing 60-64
WELTEC_R18	good	good, solid crust no	5-12	increased	1.15-1.2	after surfacing 60-65
WELTEC_H690	good	good, solid crust no	6-13	increased	1.1-1.2	after surfacing (3 layer) 63-67 (1 layer) 60-60
WELTEC_H651	good	good, solid crust no	---	increased	-	after surfacing 59-63
PP_Np_150X15R3T2	good	good, solid crust no	5-10	increased	1.2-1.25	after surfacing 58-67
WELTEC_H650	good	good, solid crust no	4-12	increased	1.1-1.2	after surfacing (3 layer) 62-66 (1 layer) 60-60
WELTEC_H639	good	good, solid crust no	6-13	increased	1.1-1.2	after surfacing 54-60
WELTEC_H560_02	good	good, solid crust no	---	increased	-	after surfacing 58-62
WELTEC_H645	good	good, solid crust no	7-10	increased	1.1-1.2	after surfacing 60-65
WELTEC_H585	good	good	4-10	increased	1.05-1.2	after surfacing 55-60
PP_Np_100X4G2AR	good	good, solid crust no	5-11	increased	1.15-1.25	after surfacing 56-62
WELTEC_H617	good	good, solid crust no	4-9	increased	1.1-1.2	after surfacing 54-60
WELTEC_H629	good	good, solid crust no	4-13	increased	1.1-1.2	after surfacing 58-64
WELTEC_H630	good	good, solid crust no	6-13	increased	1.1-1.2	after surfacing 60-65
WELTEC-H560-01	good	good, solid crust no	4-12	increased	1.1-1.2	after surfacing 50-56
PP_Np_200X12M	good	good	5-12	increased, preheating is required	1.05-1.2	after surfacing 40-48 after tempering 60-62
WELTEC_H500_RMU	good	good	4-13	increased, preheating is required	1.05	after surfacing 35-45
WELTEC_H500_RMK	good	good	4-13	increased, preheating is required	1.05	after surfacing 43-52
WELTEC_H500_RMS	good	good	4-13	increased, preheating is required	1.05	after surfacing 45-54
WELTEC_H505_RM	good	good	4-13	increased, preheating is required	1.05	after surfacing 48-54
WELTEC_H545	good	good	4-13	increased, preheating is required	1.05	after surfacing 54-58
WELTEC_H550_RM	good	good	4-13	increased, preheating is required	1.05	after surfacing 53-59
PP_Np_200X12VF	good	good	5-12	increased, preheating is required	1.05-1.2	after surfacing 40-48 after work hardening 48-56 after tempering 60-62
WELTEC_H550_01	good	good	4-13	increased, preheating is required	1.05	after surfacing 56-60
WELTEC_H300_RMM	good	good	4-13	low	1.05-1.2	after surfacing HB 220-HB 290
WELTEC_H300_RMN	good	good	4-13	low	1.1-1.2	after surfacing HB 150-HB 260
WELTEC_H370_RMK	good	good	3-14	low	1.1-1.2	after surfacing 30-42
WELTEC_H370_01	good	good	4-12	low	1.05-1.2	after surfacing 30-42
WELTEC_H370_02	good	good	4-12	low	1.05-1.2	after surfacing 30-42
WELTEC_H375_O	good	good	4-12	low	1.05-1.15	after surfacing 36-45
PP_Np_350X10B8T2	good	good, solid crust no	6-13	low	1.15-1.2	after surfacing 52-62
WELTEC_H400_01_G	good	good	4-12	low	1.05-1.15	after surfacing 40-50
WELTEC_H420_01	good	good	5-12	low	1.05-1.2	after surfacing HB 170-HB 250
WELTEC_H420_02	good	good	5-12	low	1.05-1.2	after surfacing 40-52
WELTEC_H425	good	good	5-13	low	1.05	after surfacing (3 layer) 23-30 (1 layer) 40-50
WELTEC_H425_1	good	good	5-13	low	1.05	after surfacing (3 layer) 22-30 (1 layer) 40-48
WELTEC_H425_2	good	good	5-13	low	1.05	after surfacing (3 layer) 22-30 (1 layer) 40-50
WELTEC_H425_3_S	good	good	5-13	low	1.05	after surfacing (3 layer) 24-35 (1 layer) 44-52
WELTEC_H300_RM	good	good	4-12	low	1.05-1.2	after surfacing HB 280-HB 380
WELTEC_H300_RMK	good	good	4-13	low	1.05-1.2	after surfacing HB 280-HB 380
FCWw-TMW11C	good	excellent	5-18	low	1.05-1.25	after surfacing HB 520-HB 520
WELTEC_H295	good	good	6-13	low	1.1-1.2	after surfacing HB 255-HB 340 after work hardening 48-60
WELTEC_H245	good	good	5-13	low	1.1-1.15	after surfacing HB 200-HB 280 after work hardening 44-52
PP_Np_18X1G1M	good	excellent	5-12	low	1.05-1.2	after surfacing HB 280-HB 380
WELTEC_H225	good	excellent	6-15	low	1.05	after surfacing HB 220-HB 260
WELTEC_H230	good	good	5-13	low	1.05-1.15	after surfacing HB 190-HB 250 after work hardening 40-50
WELTEC_H133	good	good	4-10	low	1.1-1.2	after surfacing (3 layer) HB 250-HB 320 (1 layer) HB 300-HB 330
WELTEC_H157	good	good	4-10	low	1.05-1.2	after surfacing (3 layer) 38-50 (1 layer) 42-52
WELTEC_H235	good	good	5-15	low	1.05	after surfacing 20-30
PP_Np_19GST	good	good	5-10	low	1.15-1.25	after surfacing HB 260-HB 320
WELTEC_H290_RM2	good	good	4-13	low	1.1-1.2	after surfacing HB 220-HB 340
PP_Np_10X14T	good	good	5-13	low	1.05-1.2	after surfacing 40-48
WELTEC_H240	good	good	5-13	low	1.05-1.15	after surfacing HB 190-HB 250 after work hardening 42-51
WELTEC_H250_RM	good	good	4-13	low	1.05-1.2	after surfacing HB 180-HB 280
WELTEC_H280	good	up to 400 °C is good	4-12	low	1.05-1.2	after surfacing 30-38
WELTEC_H290	good	good	4-13	low	1.1-1.2	after surfacing HB 220-HB 340
WELTEC_H285_01	good	good	5-12	low	1.1-1.2	after surfacing HB 200-HB 220 after work hardening 36-40
PP_Np_14GST	good	good	2-13	low	1.15-1.2	after surfacing HB 220-HB 280
PP_Np_10X15N2T	good	good	5-10	low	1.15-1.25	after surfacing HB 240-HB 300
PP_Np_250X10B8S2T	good	good, solid crust no	5-11	low	1.15-1.25	after surfacing 50-58
WELTEC_H285_RM	good	good	5-13	low	1.1-1.15	after surfacing HB 250-HB 320 after work hardening 42-47
WELTEC_H285	good	good	5-13	low	1.05-1.15	after surfacing HB 180-HB 260 after work hardening 37-48
WELTEC_H605	good	good, solid crust no	5-11	moderate	1.1-1.25	after surfacing 59-63
PP_Np_30X4B2M2FS	good	good	5-19	moderate	1.05	after surfacing 46-52
WELTEC_H610	good	good, solid crust no	5-11	moderate	1.1-1.25	after surfacing 59-63
WELTEC_H601	good	good	4-10	moderate	1.1-1.2	after surfacing 54-60
WELTEC_H600	good	good	4-12	moderate	1.1-1.2	after surfacing 58-63
WELTEC_H621	good	good	4-10	moderate	1.1-1.2	after surfacing 53-60
WELTEC_H590	good	good	3-10	moderate	1.05-1.15	after surfacing 55-61
WELTEC_H620	good	good	4-12	moderate	1.1-1.2	after surfacing 60-65
WELTEC_H575	good	good	4-10	moderate	1.05-1.2	after surfacing 55-61
WELTEC_H580_02	good	good	4-12	moderate	1.1-1.2	after surfacing 62-65
WELTEC_H580	good	good	4-12	moderate	1.1-1.2	after surfacing 60-65
PP_Np_30X2M2FN	good	good	5-19	moderate	1.05	after surfacing 42-51
WELTEC_H626	good	good	4-12	moderate	1.1-1.2	after surfacing 58-64
WELTEC_H570	good	good	4-13	moderate	1.05	after surfacing 46-53
WELTEC_H566_G	good	good	2-10	moderate	1.1-1.2	after surfacing 55-60
WELTEC_H565S	good	good	2-10	moderate	1.1-1.2	after surfacing 50-56
WELTEC_H565	good	good	4-13	moderate	1.05-1.2	after surfacing 43-58
PP_Np_200XGR	good	good, solid crust no	5-11	moderate	1.15-1.25	after surfacing 40-48
PP_Np_40X4G2SMNTF	good	good	5-10	moderate	1.1-1.25	after surfacing 48-56
WELTEC_H560	good	good	4-12	moderate	1.1-1.2	after surfacing 58-63
WELTEC_H625	good	good	4-12	moderate	1.1-1.2	after surfacing 60-65
WELTEC_H637S	good	good, solid crust no	4-13	moderate	1.1-1.2	after surfacing 54-60
PP_Np_25X5FMST	good	good	5-10	moderate	1.15-1.25	after surfacing 42-51
Wet_PP_Np_35V9X3SF_M	good	good	5-19	moderate	1.05	after surfacing 42-54
Wet_PP_Np_25X5FMS	good	good	5-18	moderate	1.05-1.25	after surfacing 41-52
Wet_PP_Np_12X13	good	good	5-13	moderate	1.05	after surfacing 36-48
Wet_PP_Np_12X14N3	good	good	5-13	moderate	1.05	after surfacing 36-52
Wet_PP_Np_10X14T	good	good	5-13	moderate	1.05-1.2	after surfacing 40-50
Wet_PP_Np_15X14G	good	good	5-13	moderate	1.05-1.2	after surfacing 25-37
Wet_PP_Np_15X14GN2	good	good	5-13	moderate	1.05-1.2	after surfacing 35-46
Wet_PP_Np_15X14GN2M1FB	good	good	6-12	moderate	1.05-1.25	after surfacing 50-59
Wet_PP_Np_20X15GSRT	good	good	5-11	moderate	1.15-1.25	after surfacing 46-55
Wet_PP_Np_200X15S1GRT	good	good, solid crust no	5-11	moderate	1.15-1.25	after surfacing 46-58
Wet_PP_Np_80X12RT	good	good	5-11	moderate	1.1-1.25	after surfacing 60-65
Wet_PP_Np_80X20R3T	good	good	5-10	moderate	1.2-1.25	after surfacing 58-65
Wet_PP_Np_60V9X3SF	good	good	5-19	moderate	1.05	after surfacing 54-60
Wet_PP_Np_35V9X3SF	good	good	5-19	moderate	1.05	after surfacing 42-54
PP_Np_25X5FMS	good	good	5-10	moderate	1.05	after surfacing 40-51
Wet_PP_Np_14GST	good	good	5-10	moderate	1.15-1.25	after surfacing HB 230-HB 280
PP_Np_90G13N4	good	good	5-10	moderate	1.1-1.2	after surfacing HB 160-HB 240 after work hardening 40-50
PP_Np_25XG2ST	good	good	4-13	moderate	1.05-1.2	after surfacing 38-52
WELTEC_H646	good	good, solid crust no	7-13	moderate	1.1-1.2	after surfacing 60-65
PP_Np_30X5G2SM	good	good	5-10	moderate	1.1-1.25	after surfacing 48-56
WELTEC_H640	good	good, solid crust no	7-13	moderate	1.1-1.2	after surfacing 60-65
PP_Np_200X15S1GRT	good	good, solid crust no	5-11	moderate	1.15-1.25	after surfacing 46-58
WELTEC_H552	good	good, solid crust no	4-13	moderate	1.1-1.2	after surfacing 55-60
WELTEC_H636	good	good, solid crust no	6-13	moderate	1.1-1.25	after surfacing 58-65
WELTEC_H635_02	good	good, solid crust no	---	moderate	-	after surfacing 60-64
WELTEC-H635-01	good	good, solid crust no	6-13	moderate	1.1-1.25	after surfacing 56-60
WELTEC_H635	good	good, solid crust no	6-13	moderate	1.1-1.2	after surfacing 52-60
PP_Np_30X4G2M	good	good	5-10	moderate	1.05-1.25	after surfacing 42-50
PP_Np_80X20R3T	good	good, solid crust no	5-10	moderate	1.2-1.25	after surfacing 58-65
WELTEC_H520	good	good	4-10	moderate	1.05-1.15	after surfacing 46-54
PP_Np_35V9X3SF	good	good	4-13	moderate	1.05-1.15	after surfacing 43-52
WELTEC_H420	good	good	4-14	moderate	1.05-1.2	after surfacing 39-48
WELTEC_H460_01	good	good	4-14	moderate	1.05-1.2	after surfacing 44-50
WELTEC_H460_RMZ	good	good	5-13	moderate	1.05	after surfacing 45-52
WELTEC_H460K	good	good	5-13	moderate	1.05	after surfacing 41-52
WELTEC_H460	good	good	4-13	moderate	1.05-1.2	after surfacing 41-52
WELTEC_H455	good	good	4-13	moderate	1.05-1.2	after surfacing 50-56
WELTEC_H450	good	good	4-13	moderate	1.05-1.2	after surfacing 43-52
WELTEC_H200_01	good	good	6-15	moderate	1.05	after surfacing HB 180-HB 220 after work hardening 40-45
WELTEC_H210U	good	good	5-12	moderate	1.1-1.15	after surfacing HB 200-HB 260 after work hardening 40-47
WELTEC_H216_O	good	good	6-15	moderate	1.1-1.15	after surfacing HB 200-HB 260 after work hardening 40-45
WELTEC_H220U	good	good	5-12	moderate	1.1-1.15	after surfacing HB 280-HB 380 after work hardening 40-47
WELTEC_H421	good	good	4-14	moderate	1.05-1.2	after surfacing 45-55
WELTEC_H416	good	good	4-14	moderate	1.05-1.2	after surfacing 38-45
WELTEC_H460_03	good	good	4-14	moderate	1.05-1.2	after surfacing 56-60
WELTEC_H415	good	good	4-14	moderate	1.05-1.2	after surfacing 38-45
WELTEC_H410	good	good	4-14	moderate	1.05	after surfacing 36-52
WT_Pr_400_01_F	good	good	4-14	moderate	1.05	after surfacing 30-42
WELTEC_H400	good	good	4-14	moderate	1.05	after surfacing 38-48
WELTEC_H390S	good	good	4-14	moderate	1.05	after surfacing 39-48
WELTEC_H390	good	good	4-14	moderate	1.05	after surfacing 36-46
WELTEC_H380	good	good	4-14	moderate	1.05-1.2	after surfacing 30-49
WELTEC_H370_RM	good	good	4-13	moderate	1.05-1.2	after surfacing 30-42
NVT-163M1	good	good	6-14	moderate	1.05	after surfacing HB 200-HB 240
WELTEC_H360_S	good	good	7-15	moderate	1.05	after surfacing 34-40
WELTEC_H351_RM	good	good	4-12	moderate	1.05-1.2	after surfacing 30-42
WELTEC_H350_RM	good	good	4-12	moderate	1.05-1.2	after surfacing HB 320-HB 420
WELTEC_H460_02	good	good	4-12	moderate	1.05-1.2	after surfacing 44-55
WELTEC_H200_O	good	good	4-12	moderate	1.05-1.15	after surfacing HB 160-HB 260 after work hardening 40-50
PP_Np_45V9X3SF	good	good	5-19	moderate	1.05	after surfacing 42-56
WELTEC_H480S	good	good	4-12	moderate	1.1-1.2	after surfacing 47-53
WELTEC_H540	good	good	4-13	moderate	1.05-1.2	after surfacing 50-58
WELTEC_H535	good	good	4-12	moderate	1.1-1.15	after surfacing 50-58
WELTEC_H530	good	good, solid crust no	4-13	moderate	1.1-1.15	after surfacing 48-59
WELTEC_H525	good	good	4-10	moderate	1.05-1.2	after surfacing 49-55
PP_Np_50X3ST	good	good	5-10	moderate	1.15-1.25	after surfacing 45-55
PP_Np_35X6M2	good	good	5-19	moderate	1.05	after surfacing 44-55
PP_Np_12X12G12SF	good	good	5-19	moderate	1.05	after surfacing HB 200-HB 240 after work hardening 40-50
WELTEC_H500_RMZ	good	good	4-13	moderate	1.05	after surfacing 43-52
WELTEC_H500_RM	good	good	4-13	moderate	1.05	after surfacing 43-52
WELTEC_H490	good	good	4-13	moderate	1.05-1.2	after surfacing 45-55
WELTEC_H480NT	good	good	4-13	moderate	1.05	after surfacing 46-53
WELTEC_H480K	good	good	4-13	moderate	1.05	after surfacing 47-53
WELTEC_H460_05	good	good	4-14	moderate	1.05-1.2	after surfacing 46-52
WELTEC_H480	good	good	4-13	moderate	1.05	after surfacing 47-53
WELTEC_H479	good	good	4-14	moderate	1.05	after surfacing 48-54
WELTEC_H473_O	good	good	4-10	moderate	1.1-1.2	after surfacing (1 layer) 44-52 (3 layer) 35-48
WELTEC_H472_02	good	good	4-14	moderate	1.05	after surfacing HB 250-HB 320
WELTEC_H472_01	good	good	5-13	moderate	1.05-1.2	after surfacing HB 160-HB 220
WELTEC_H472	good	good	4-14	moderate	1.05-1.2	after surfacing HB 250-HB 350
WELTEC_H471	good	good	4-14	moderate	1.05-1.2	after surfacing 35-46
WELTEC_H470S	good	good	4-13	moderate	1.1-1.2	after surfacing 38-44
WELTEC_H470	good	good	4-14	moderate	1.05	after surfacing 40-52
WELTEC_H468	good	good	4-14	moderate	1.05	after surfacing 38-44
WELTEC_H465	good	good	4-13	moderate	1.05-1.2	after surfacing 42-52
WELTEC_H462	good	good	4-10	moderate	1.05-1.15	after surfacing 47-54
WELTEC_H460_04	good	good	4-14	moderate	1.05-1.2	after surfacing 40-48
WELTEC_H574	good	good	4-12	moderate, preheating is required	1.1-1.2	after surfacing 46-55 after work hardening 55-60 after tempering 22-25