%C | %Mn | %Si | %S | %P | %Cu | |
Requirements -AWS A5.18: E70C-6M-H4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 0.50 max |
AWS A5.36: E70T15-M20A4-CS1-H4 | 0.030 max | 0.030 max | ||||
###As-Welded with 75$ Ar / 25$ CO2 | 0.03-0.05 | 0.60-0.67 | 0.57-0.65 | 0.011-0.014 | 0.005-0.007 | 0.04-0.05 |
###As-Welded with 90$ Ar / 10$ CO2 | 0.04-0.06 | 0.61-0.70 | 0.61-0.64 | 0.011- 0.013 | 0.005-0.006 | 0.04-0.06 |
%Ni | %Cr | %Mo | %V | %B | Diffusible Hydrogen(mL/100g weld deposit) | |
Requirements -AWS A5.18: E70C-6M-H4 | 0.50 max | 0.20 max | 0.30 max | 0.08 max | Not Specified | 4.0 max |
AWS A5.36: E70T15-M20A4-CS1-H4 | 4 max | |||||
###As-Welded with 75$ Ar / 25$ CO2 | 0.02-0.03 | 0.03-0.04 | 0.02 | <0.01 | 0.002-0.003 | 1-2 |
###As-Welded with 90$ Ar / 10$ CO2 | 0.02 | 0.03-0.04 | 0.02 | <0.01 | 0.003 | 1 |
%C | %Mn | %Si | %S | %P | %Cu | %Ni | |
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max0.030 max | 0.03 max0.030 max | 0.50 max0.035 max | 0.50 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.03-0.05 | 1.25-1.60 | 0.40-0.60 | 0.01-0.02 | 0.01-0.02 | 0.01-0.05 | 0.02-0.05 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.03-0.05 | 1.25-1.70 | 0.40-0.70 | 0.01-0.02 | 0.01-0.02 | 0.01-0.05 | 0.02-0.05 |
%Cr | %Mo | %V | %B | %Ni + %Cr + %Mo + %V | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.20 max | 0.30 max | 0.08 max | Not Specified | 0.50 max | 4.0 max4 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01-0.04 | 0.01-0.02 | 0.01-0.02 | 0.004-0.005 | 0.05-0.10 | 2-4 | |
###As-Welded with 90$ Argon / 10$ CO2 | 0.01-0.04 | 0.01-0.02 | 0.01-0.02 | 0.004-0.005 | 0.05-0.10 |
%C | %Mn | %Si | %S | %P | %Cu | %Ni | |
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max0.030 max | 0.03 max0.030 max | 0.50 max0.035 max | 0.50 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.03-0.05 | 1.25-1.60 | 0.50-0.80 | 0.02-0.03 | 0.01-0.02 | 0.01-0.05 | 0.01-0.03 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.03-0.05 | 1.25-1.70 | 0.60-0.85 | 0.02-0.03 | 0.01-0.02 | 0.01-0.05 | 0.01-0.03 |
%Cr | %Mo | %V | %B | %Ni + %Cr + %Mo + %V | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.20 max | 0.30 max | 0.08 max | Not Specified | 0.50 max | 4.0 max4 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01-0.04 | 0.01-0.02 | 0.01-0.02 | 0.005-0.006 | 0.05-0.10 | 2-4 | |
###As-Welded with 90$ Argon / 10$ CO2 | 0.01-0.05 | 0.01-0.02 | 0.01-0.02 | 0.005-0.006 | 0.05-0.10 |
%C | %Mn | %Si | %S | |
Requirements - AWS A5.18: E70C-6M-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max |
AWS A5.36: E70T15-M20A2-CS1-H8 | 0.030 max | |||
###As-Welded with 75$ Argon / 25$ CO2 | 0.02-0.05 | 1.20-1.65 | 0.50-0.75 | 0.01-0.02 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.02-0.05 | 1.40-1.85 | 0.50-0.90 | 0.01-0.02 |
%P | %Cu | %Ni | %Cr | |
Requirements - AWS A5.18: E70C-6M-H8 AWS A5.36: E70T15-M20A2-CS1-H8 | 0.03 max0.030 max | 0.50 max0.035 max | 0.50 max | 0.20 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01-0.02 | 0.01-0.05 | 0.02-0.04 | 0.01-0.04 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.01-0.02 | 0.01-0.05 | 0.02-0.05 | 0.01-0.04 |
%Mo | %V | %Ni + %C + %Mo + %V | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS A5.18: E70C-6M-H8 AWS A5.36: E70T15-M20A2-CS1-H8 | 0.30 max | 0.08 max | 0.50 max | 8.0 max8 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01-0.02 | 0.01-0.02 | 0.05-0.10 | 6-8 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.01-0.02 | 0.01-0.02 | 0.05-0.10 |
%C | %Mn | %Si | %S | %P | %B | |
###As-Welded with 90$ Argon / 10$ CO2 | 0.07-0.12 | 1.5-2.1 | 0.9-1.25 | 0.02 max | 0.015 max | < 0.001 |
%C | %Mn | %Si | %S | %P | %Cu | |
Requirements - AWS A5.28: E80C-Ni1-H4AWS A5.36: E80T15-M13A5-Ni1-H4 | 0.12 max | 1.50 max1.75 max | 0.90 max0.80 max | 0.025 max0.030 max | 0.030 max | 0.35 max Not Specified |
###As-Welded with 98$ Argon / 2$ O2 | 0.07 - 0.08 | 1.31 - 1.35 | 0.48 - 0.50 | 0.024 max | 0.012 | 0.03 - 0.05 |
###As-Welded with 92$ Argon / 8$ CO2 | 0.05 - 0.07 | 1.22 - 1.30 | 0.43 - 0.47 | 0.024 max | 0.012 | 0.03 - 0.05 |
###As-Welded with 75$ Argon / 25$ CO2 | 0.05 - 0.06 | 1.14 - 1.19 | 0.38 - 0.42 | 0.024 max | 0.012 | 0.04 - 0.06 |
%Ni | %Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS A5.28: E80C-Ni1-H4AWS A5.36: E80T15-M13A5-Ni1-H4 | 0.80 - 1.101.25 - 2.60 | Not Specified0.15 max | 0.30 max | 0.03 max | Not Specified | 4.0 max4 max |
###As-Welded with 98$ Argon / 2$ O2 | 0.84 - 0.86 | 0.05 max | 0.10 max | 0.01 max | 0.003-0.004 | 3 - 4 |
###As-Welded with 92$ Argon / 8$ CO2 | 0.83 - 0.86 | 0.05 max | 0.10 max | 0.01 max | 0.003-0.004 | 3 - 4 |
###As-Welded with 75$ Argon / 25$ CO2 | 0.80 - 0.85 | 0.05 max | 0.10 max | 0.01 max | 0.003-0.004 | 3 - 4 |
%C | %Mn | %Si | %S | %P | %Cu | |
Requirements - AWS A5.28: E90C-K3-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.025 max | 0.025 max | 0.35 max |
AWS A5.36: E90T15-M20A6-K3-H4 | 0.030 max | 0.030 max | Not Specified | |||
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.08 | 1.00-1.51 | 0.20-0.35 | 0.01-0.02 | 0.01-0.02 | 0.02-0.06 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.04-0.08 | 1.10-1.65 | 0.20-0.35 | 0.01-0.02 | 0.01-0.02 | 0.03-0.07 |
%Ni | %Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS A5.28: E90C-K3-H4AWS A5.36: E90T15-M20A6-K3-H4 | 0.50-2.501.25 - 2.60 | 0.15 max | 0.25-0.65 | 0.03 max0.05 max | Not Specified | 4.0 max4 max |
###As-Welded with 75$ Argon / 25$ CO2 | 1.50-1.90 | 0.01-0.10 | 0.30-0.45 | 0.01-0.02 | 0.003-0.004 | 2.5-4 |
###As-Welded with 90$ Argon / 10$ CO2 | 1.60-1.90 | 0.01-0.10 | 0.30-0.45 | 0.01-0.02 | 0.003-0.004 |
%C | %Mn | %Si | %S | %P | %Cu | |
Requirements - AWS A5.28: E110C-K4-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.025 max | 0.025 max | 0.35 max |
AWS A5.36: E110T15-M20A6-K4-H4 | 1.20 - 2.25 | 0.030 max | 0.030 max | Not Specified | ||
###As-Welded with 75$ Argon / 25$ CO2 | 0.05-0.08 | 1.45-1.75 | 0.45-0.65 | 0.01-0.02 | 0.01-0.02 | 0.02-0.06 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.05-0.08 | 1.45-1.75 | 0.45-0.65 | 0.01-0.02 | 0.01-0.02 | 0.02-0.06 |
%Ni | %Cr | %Mo | %V | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS A5.28: E110C-K4-H4 | 0.50-2.50 | 0.15-0.65 | 0.25-0.65 | 0.03 max | 4.0 max | |
AWS A5.36: E110T15-M20A6-K4-H4 | 1.75 - 2.60 | 0.20 - 0.60 | 0.20 - 0.65 | 4 max | ||
###As-Welded with 75$ Argon / 25$ CO2 | 2.00-2.20 | 0.20-0.35 | 0.45-0.55 | 0.01-0.02 | 2.5-4 | |
###As-Welded with 90$ Argon / 10$ CO2 | 2.00-2.20 | 0.20-0.35 | 0.45-0.55 | 0.01-0.02 |
%C | %Mn | %Si | %S | %P | %Cu | |
Requirements - AWS A5.28: E120C-K4-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.025 max | 0.025 max | 0.35 max |
AWS A5.36: E120T15-M20A6-K4-H4 | 1.20 - 2.25 | 0.030 max | 0.030 max | Not Specified | ||
###As-Welded with 75$ Argon / 25$ CO2 | 0.06 - 0.07 | 1.70 - 1.80 | 0.58 - 0.62 | 0.010 | 0.010 | 0.02 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.06 - 0.08 | 1.80 - 1.90 | 0.60 - 0.66 | 0.020 | 0.02 - 0.03 | |
%Ni | %Cr | %Mo | %V | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS A5.28: E120C-K4-H4 | 0.50-2.50 | 0.15-0.65 | 0.25-0.65 | 0.03 max | 4.0 max | |
AWS A5.36: E120T15-M20A6-K4-H4 | 1.75 - 2.60 | 0.20 - 0.60 | 0.20 - 0.65 | 4 max | ||
###As-Welded with 75$ Argon / 25$ CO2 | 1.90 - 2.10 | 0.31 - 0.33 | 0.55 - 0.58 | 0.01 | 1.0 | 3.0 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.56 - 0.63 |
%C | %Mn | %Si | %S | %P | %Cu | %Ni | |
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max0.030 max | 0.03 max0.030 max | 0.50 max0.035 max | 0.50 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.03-0.05 | 1.25-1.60 | 0.40-0.60 | 0.01-0.02 | 0.01-0.02 | 0.01-0.05 | 0.02-0.05 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.03-0.05 | 1.25-1.70 | 0.40-0.70 | 0.01-0.02 | 0.01-0.02 | 0.01-0.05 | 0.02-0.05 |
%Cr | %Mo | %V | %B | %Ni + %Cr + %Mo + %V | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.20 max | 0.30 max | 0.08 max | Not Specified | 0.50 max | 4.0 max4 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01-0.04 | 0.01-0.02 | 0.01-0.02 | 0.004-0.005 | 0.05-0.10 | 2 | 4 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.01-0.04 | 0.01-0.02 | 0.01-0.02 | 0.004-0.005 | 0.05-0.10 |
%C | %Mn | %Si | %S | %P | %Cu | %Ni | |
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max0.030 max | 0.03 max0.030 max | 0.50 max0.035 max | 0.50 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.03-0.05 | 1.25-1.60 | 0.50-0.80 | 0.02-0.03 | 0.01-0.02 | 0.01-0.05 | 0.01-0.03 |
###As-Welded with 90$ Argon / 10$ CO2 | 0.03-0.05 | 1.25-1.70 | 0.60-0.85 | 0.02-0.03 | 0.01-0.02 | 0.01-0.05 | 0.01-0.03 |
%Cr | %Mo | %V | %B | %Ni + %Cr + %Mo + %V | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS A5.18: E70C-6M-H4AWS A5.36: E70T15-M20A4-CS1-H4 | 0.20 max | 0.30 max | 0.08 max | Not Specified | 0.50 max | 4.0 max4 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01-0.04 | 0.01-0.02 | 0.01-0.02 | 0.005-0.006 | 0.05-0.10 | 2-4 | |
###As-Welded with 90$ Argon / 10$ CO2 | 0.01-0.05 | 0.01-0.02 | 0.01-0.02 | 0.005-0.006 | 0.05-0.10 |
%C | %Mn | %Si | %S | %P | %Cu | |
Requirements - AWS A5.28: E80C-Ni1-H4AWS A5.36: E80T15-M13A5-Ni1-H4 | 0.12 max | 1.50 max1.75 max | 0.90 max0.80 max | 0.025 max0.030 max | 0.030 max | 0.35 maxNot Specified |
###As-Welded with 98$ Argon / 2$ O2 | 0.07 - 0.08 | 1.31 - 1.35 | 0.48 - 0.50 | 0.024 max | 0.012 | 0.03 - 0.05 |
###As-Welded with 92$ Argon / 8$ CO2 | 0.05 - 0.07 | 1.22 - 1.30 | 0.43 - 0.47 | 0.024 max | 0.012 | 0.03 - 0.05 |
###As-Welded with 75$ Argon / 25$ CO2 | 0.05 - 0.06 | 1.14 - 1.19 | 0.38 - 0.42 | 0.024 max | 0.012 | 0.04 - 0.06 |
%Ni | %Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS A5.28: E80C-Ni1-H4AWS A5.36: E80T15-M13A5-Ni1-H4 | 0.80 - 1.101.25 - 2.60 | Not Specified0.15 max | 0.30 max | 0.03 max | Not Specified | 4.0 max4 max |
###As-Welded with 98$ Argon / 2$ O2 | 0.84 - 0.86 | 0.05 max | 0.10 max | 0.01 max | 0.003-0.004 | 3 - 4 |
###As-Welded with 92$ Argon / 8$ CO2 | 0.83 - 0.86 | 0.05 max | 0.10 max | 0.01 max | 0.003-0.004 | 3 - 4 |
###As-Welded with 75$ Argon / 25$ CO2 | 0.80 - 0.85 | 0.05 max | 0.10 max | 0.01 max | 0.003-0.004 | 3 - 4 |
%C | %Mn | %Si | %S | %P | %Al | %Ti | |
###Typical Results | 0.17-0.22 | 0.95-1.11 | 0.34-0.40 | 0.008-0.02 | 0.01-0.02 | 0.07-0.12 | 0.40-0.49 |
%C | %Mn | %Si | %S | %P | %Al | |
###Typical Results | 0.22-0.26 | 0.42-0.65 | 0.20-0.27 | 0.005-0.007 | 0.007-0.02 | 1.18-1.49 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E70T-6 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.06-0.09 | 1.08-1.57 | 0.20-0.27 | <0.01 | <0.01 | 0.9-1.1 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E70T-7 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.25-0.29 | 0.44-0.51 | 0.09-0.12 | <0.01 | <0.01 | 1.4-1.7 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E70T-4 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.21-0.25 | 0.37-0.53 | 0.25-0.29 | <0.01 | <0.01 | 1.3-1.6 |
%C | %Mn | %Si | %S | %P | %Ni | %Cr | %Mo | %V | %Al | |
Requirements -AWS E70T7-K2 / E80TG-K2 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 | 0.15 max | 0.35 max | 0.05 max | 1.8 max |
###Typical Results | 0.06-0.08 | 1.25-1.40 | 0.18-0.22 | <0.003 | 0.005-0.008 | 1.29-1.56 | 0.03-0.04 | <0.03 | - | 1.0-1.3 |
%C | %Mn | %Si | %S | %P | %Al | |
###Typical Results | 0.25-0.30 | 0.83-1.04 | 0.20-0.23 | 0.006-0.01 | 0.005-0.02 | 1.08-1.38 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E71T-8-J | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.04-0.07 | 1.35-1.47 | 0.22-0.32 | <0.01 | <0.01 | 0.8-1.0 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E71T-11 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.23-0.26 | 0.57-0.66 | 0.17-0.26 | <0.01 | <0.01 | 1.3-1.6 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E71T-8 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.16-0.18 | 0.61-0.72 | 0.26-0.33 | <0.01 | <0.01 | 0.5-0.8 |
%C | %Mn | %Si | %S | %P | %Al | Diffusible Hydrogen(mL/100g weld deposit) | |
Requirements - AWS E71T-8-H8 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max | 8.0 max |
###Typical Results | 0.16-0.18 | 0.61-0.72 | 0.26-0.33 | <0.01 | <0.01 | 0.5-0.8 | 5-7 |
%C | %Mn | %Si | %S | %P | %Al | |
Requirements - AWS E71T-8-H8 | 0.30 max | 1.75 max | 0.60 max | 0.03 max | 0.03 max | 1.8 max |
###Typical Results | 0.15-0.20 | 0.61-0.65 | 0.17-0.21 | <0.03 | <0.01 | 0.5-0.6 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E71T8-Ni1 | 0.12 max | 1.50 max | 0.80 max | 0.030 max | 0.030 max |
###Typical Results | 0.05-0.07 | 1.10-1.22 | 0.30-0.33 | <0.010 | 0.005-0.008 |
%Ni | %Cr | %Mo | %V | %Al | |
Requirements - AWS E71T8-Ni1 | 0.80-1.10 | 0.15 max | 0.35 max | 0.05 max | 1.8 min |
###Typical Results | 0.89-1.05 | 0.02-0.03 | 0.01-0.02 | <0.01 | 0.8-1.0 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements - AWS E71T8-K2 | 0.15 max | 0.50-1.75 | 0.80 max | 0.03 max | 0.03 max | 1.00-2.00 |
###Typical Results(3, 4) | 0.04-0.07 | 0.74-0.85 | 0.06-0.09 | <0.01 | <0.01 | 1.00-1.21 |
%Cr | %Mo | %V | %Al | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS E71T8-K2 | 0.15 max | 0.35 max | 0.05 max | 1.8 max | Not Specified | |
###Typical Results(3, 4) | 0.09-0.13 | 0.01-0.05 | <0.01 | 0.65-1.12 | 5-8 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E71T8-K6 | 0.15 max | 0.50-1.50 | 0.80 max | 0.030 max | 0.030 max |
###Typical Results | 0.05-0.07 | 0.87-0.96 | 0.23-0.27 | <0.003 | 0.004-0.008 |
%Ni | %Cr | %Mo | %V | %Al | |
Requirements - AWS E71T8-K6 | 0.40-1.00 | 0.20 max | 0.15 max | 0.05 max | 1.8 max |
###Typical Results | 0.73-0.83 | 0.02-0.03 | 0.02-0.03 | <0.01 | 0.9-1.1 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements - AWS E91T8-G-H8 | Not Specified | 0.50 min | 1.00 max | 0.030 max | 0.030 max | 0.50 min |
###Typical Results | 0.04-0.07 | 1.48-2.02 | 0.11-0.31 | <0.003 | 0.004-0.010 | 0.71-0.98 |
%Cr | %Mo | %V | %Al | Diffusible Hydrogen (mL/100g weld metal) | ||
Requirements - AWS E91T8-G-H8 | 0.30 min | 0.20 max | 0.10 min | 1.8 min | 8.0 max | |
###Typical Results | 0.02-0.03 | <0.04 | <0.01 | 0.9-1.2 | <8 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E71TG-G | Not Specified | 0.50 min | 1.00 max | 0.030 max | 0.030 max |
###Typical Results | 0.06-0.11 | 0.84-1.55 | 0.20-0.33 | <0.003 | 0.006-0.009 |
%Ni | %Cr | %Mo | %V | %Al | |
Requirements - AWS E71TG-G | 0.50 min | 0.30 min | 0.20 min | 0.10 min | 1.8 max |
###Typical Results | 1.02-1.15 | 0.02-0.04 | <0.02 | - | 1.3-1.6 |
%C | %Mn | %Ni | %Si | %S | %P | %Al | |
Requirements AWS E71T8-Ni2-JH8 | 0.30 max | 1.75 max | 1.75-2.75 | 0.60 max | 0.030 max | 0.030 max | 1.8 max |
###Typical Results(3,4) | 0.01-0.03 | 0.74-1.12 | 1.77-2.10 | 0.13-0.17 | 0.002-0.004 | 0.007-0.012 | 0.84-1.07 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T8-G | 0.15 max | 1.00-2.00 | 0.40 max | 0.030 max | 0.030 max | 0.50-1.50 |
AWS A5.36: E81T8-A5-K8-H8 | ||||||
###Typical Results | 0.05 | 1.84 | 0.17 | 0.001 | 0.011 | 1.12 |
%Cr | %Mo | %V | %Al | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29: E81T8-G | 0.20 max | 0.20 max | 0.05 max | 1.80 max | ||
AWS A5.36: E81T8-A5-K8-H8 | 8 max | |||||
###Typical Results | 0.05 | 0.01 | 0.00 | 0.84 | 5 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.20: E71T-9C-JH4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 0.50 max |
AWS A5.29: E81T1-GC-H4 | Not Specified | 0.50 | 1.00 max | 0.030 max | 0.030 max | 0.50 |
AWS A5.36: E71T1-C1A6-CS1-H4 | 0.12 max | 1.75 max | 0.90 max | 0.030 max | 0.030 max | 0.50 max |
###As-Welded with 100$ CO2 | 0.04-0.08 | 1.19-1.41 | 0.37-0.47 | 0.003-0.005 | 0.012-0.013 | 0.35-0.38 |
%Cr | %Mo | %V | %Cu | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20: E71T-9C-JH4 | 0.20 max | 0.30 max | 0.08 max | 0.35 max | 4.0 max | |
AWS A5.29: E81T1-GC-H4 | 0.30 | 0.20 | 0.10 | Not Specified | Not Specified | |
AWS A5.36: E71T1-C1A6-CS1-H4 | 0.20 max | 0.30 max | 0.08 max | 0.35 max | 4 max | |
###As-Welded with 100$ CO2 | 0.02-0.03 | 0.00-0.01 | 0.01 | 0.23-0.28 | 0.003-0.004 | 1-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.20: E71T-9M-JH4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 0.50 max |
AWS A5.29: E81T1-GM-H4 | Not Specified | 0.50 | 1.00 max | 0.030 max | 0.030 max | 0.50 |
AWS A5.36: E71T1-M21A0-CS1-H8 | 0.12 max | 1.75 max | 0.90 max | 0.030 max | 0.030 max | 0.50 max |
###As-Welded with 80$ Ar/ 20$ CO2 | 0.05-0.07 | 1.33-1.57 | 0.41-0.49 | 0.005-0.007 | 0.012-0.014 | 0.27-0.33 |
%Cr | %Mo | %V | %Cu | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20: E71T-9M-JH4 | 0.20 max | 0.30 max | 0.08 max | 0.35 max | Not Specified | 4.0 max |
AWS A5.29: E81T1-GM-H4 | 0.30 | 0.20 | 0.10 | Not Specified | ||
AWS A5.36: E71T1-M21A0-CS1-H8 | 0.20 max | 0.30 max | 0.08 max | 0.35 max | 4 max | |
###As-Welded with 80$ Ar/ 20$ CO2 | 0.02 | < 0.01 | 0.01 | 0.20-0.26 | 0.003-0.005 | 1-4 |
%C | %Mn | %Si | %S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1C-H8, E71T-1M-H8 | 0.12 | 1.75 | 0.90 | 0.03 | 0.03 | 8.0 |
AWS E71T-9C-H8, E71T-9M-H8 | max | max | max | max | max | max |
###As-Welded with 100$ CO2 | 0.03-0.04 | 1.28-1.41 | 0.42-0.49 | 0.01 | 0.01-0.02 | 3-8 |
###As-Welded with 75$ Ar/25$ CO2 | 0.03-0.04 | 1.45-1.60 | 0.54-0.62 | 0.01 | 0.01-0.02 | 4-8 |
%C | %Mn | %Si | %S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1M, E71T-9M | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 8.0 max |
###As-Welded with 75$-85$ Ar/balance CO2 | 0.03-0.04 | 1.43-1.56 | 0.52-0.59 | <0.01 | 0.01 | 6-8 |
%C | %Mn | %Si | %S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1C-H8 | 0.12 | 1.75 | 0.90 | 0.03 | 0.03 | 8.0 |
AWS E71T-9C-H8 | max | max | max | max | max | max |
###As-Welded with 100$ CO2 | 0.03-0.04 | 1.31-1.41 | 0.43-0.49 | 0.01 | 0.01 | 4-7 |
%C | %Mn | %Si | %S | %P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1C-JH8, E71T-9C-JH8 | 0.12 | 1.75 max | 0.90 | 0.03 | 0.03 | 0.50 | 8.0 |
AWS E71T-12C-JH8 | max | 1.60 max | max | max | max | max | max |
###As-Welded with 100$ CO2 | 0.03 | 1.34-1.49 | 0.26-0.32 | 0.01 | 0.01-0.02 | 0.33-0.41 | 3-8 |
%C | %Mn | %Si | %S | |
Requirements AWS A5.20: E71T-12C-JH4 | 0.12 max | 1.60 max | 0.90 max | 0.03 max |
AWS A5.36: E71T1-C1A6-CS2-H4,E71T1-C1P5-CS2-H4 | 0.030 max | |||
###Typical Results with 100$ CO2 | 0.04-0.05 | 1.48-1.57 | 0.45-0.50 | 0.008 |
%P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.20: E71T-12C-JH4 | 0.03 max | 0.50 max | 4.0 max | |
AWS A5.36: E71T1-C1A6-CS2-H4,E71T1-C1P5-CS2-H4 | 0.030 max | 4 max | ||
###Typical Results with 100$ CO2 | 0.013 | 0.02 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1M-JH8, E71T-9M-JH8 | 0.12 | 1.75 max | 0.90 | 0.03 | 0.03 | 0.50 | 8.0 |
AWS E71T-12M-JH8 | max | 1.60 max | max | max | max | max | max |
###As-Welded with 75$-80$ Ar/balance CO2 | 0.03-0.04 | 1.40-1.53 | 0.31-0.36 | 0.01 | 0.01 | 0.32-0.38 | 4 - 8 |
%C | %Mn | %Si | %S | %P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1M-JH4, E71T-9M-JH4 | 0.12 | 1.75 max | 0.90 | 0.03 | 0.03 | 0.50 | 4.0 |
AWS E71T-12M-JH4 | max | 1.60 max | max | max | max | max | max |
###As-Welded with 75$-80$ Ar/balance CO2 | 0.03-0.04 | 1.25-1.37 | 0.28-0.33 | 0.01 | 0.01 | 0.35-0.41 | 2-4 |
%C | %Mn | %Si | %S | |
Requirements AWS A5.20: E71T-12M-JH4 | 0.12 max | 1.60 max | 0.90 max | 0.03 max |
AWS A5.36: E71T1-M21A6-CS2-H4,E71T1-M21P5-CS2-H4AWS A5.29: E81T1-GM | 0.030 max | |||
###Typical Results with 75-80$ Ar / Balance CO2 | 0.04-0.05 | 1.40-1.48 | 0.44-0.46 | 0.008 |
%P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.20: E71T-12M-JH4 | 0.03 max | 0.50 max | 4.0 max | |
AWS A5.36: E71T1-M21A6-CS2-H4,E71T1-M21P5-CS2-H4AWS A5.29: E81T1-GM | 0.030 max | 4 max | ||
###Typical Results with 75-80$ Ar / Balance CO2 | 0.015 | 0.04 | 2-4 |
%C | %Mn | %Si | %S | |
Requirements AWS A5.20: E71T-1C-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max |
AWS A5.36: E71T1-C1A0-CS1-H8 | 0.030 max | |||
###As-Welded with 100$ CO2 | 0.08 | 0.11-0.13 | 0.40-0.50 | 0.005 |
%P | %Ni | Diffusible Hydrogen (ml/100g weld deposit) | ||
Requirements AWS A5.20: E71T-1C-H8 | 0.03 max | 0.50 max | 8.0 max | |
AWS A5.36: E71T1-C1A0-CS1-H8 | 0.030 max | 8 max | ||
###As-Welded with 100$ CO2 | 0.010 | 0.38-0.50 | 3-5 |
%C | %Mn | %Si | %S | |
Requirements AWS A5.20: E71T-1M-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max |
AWS A5.36: E71T1-M21A0-CS1-H8 | 0.030 max | |||
###As-Welded with 75$ Ar/25$ CO2 | 0.08-0.09 | 0.12-0.14 | 0.49-0.54 | 0.006-0.007 |
%P | %Ni | Diffusible Hydrogen (ml/100g weld deposit) | ||
Requirements AWS A5.20: E71T-1M-H8 | 0.03 max | 0.50 max | 8.0 max | |
AWS A5.36: E71T1-M21A0-CS1-H8 | 0.030 max | 8 max | ||
###As-Welded with 75$ Ar/25$ CO2 | 0.010 | 0.44-0.46 | 4-6 |
%C | %Mn | %Si | |
Requirements - AWS E71T-1C-H8, E71T-9C-H8 | 0.12 max | 1.75 max | 0.90 max |
###As-Welded with 100$ CO2 | 0.04-0.05 | 1.36-1.46 | 0.38-0.42 |
%S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS E71T-1C-H8, E71T-9C-H8 | 0.03 max | 0.03 max | 8 max |
###As-Welded with 100$ CO2 | 0.01 | 0.01 | 4-6 |
%C | %Mn | %Si | %S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS E71T-1M-H8, E71T-9M-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 8 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.05 | 1.44-1.50 | 0.49-0.53 | <0.01 | 0.01 | 3-7 |
%C | %Mn | %Si | %Ni | |
Requirements AWS A5.20: E71T-12C-JH8AWS A5.36: E71T1-C1A4-CS2-H8 | 0.12 max | 1.60 max | 0.90 max | 0.50 max |
###As-Welded with 100$ CO2 | 0.04 | 1.35 | 0.33 | 0.40 |
%S | %P | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.20: E71T-12C-JH8AWS A5.36: E71T1-C1A4-CS2-H8 | 0.03 max0.030 max | 0.03 max0.030 max | 8.0 max8 max | |
###As-Welded with 100$ CO2 | 0.01 | 0.01 | 4-7 |
%C | %Mn | %Si | %Ni | |
Requirements AWS A5.20: E71T-12M-JH8AWS A5.36: E71T1-M21A4-CS2-H8 | 0.12 max | 1.60 max | 0.90 max | 0.50 max |
###As-Welded with 75$ Argon / 25$ CO2 | 0.05 | 1.40 | 0.39 | 0.40 |
%S | %P | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.20: E71T-12M-JH8AWS A5.36: E71T1-M21A4-CS2-H8 | 0.03 max0.030 max | 0.03 max0.030 max | 8.0 max8 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.01 | 0.01 | 4-7 |
%C | %Mn | %Si | %S | |
Requirements AWS A5.20: E71T-1C-H8,E71T-9C-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max |
AWS A5.36: E71T1-C1A2-CS1-H8 | 0.030 max | |||
###As-Welded with 100$ CO2 | 0.04-0.05 | 1.59-1.70 | 0.36-0.40 | 0.01 |
%P | %Ni | Diffusible Hydrogen (ml/100g weld deposit) | ||
Requirements AWS A5.20: E71T-1C-H8,E71T-9C-H8 | 0.03 max | 0.50 max | 8.0 max | |
AWS A5.36: E71T1-C1A2-CS1-H8 | 0.030 max | 8 max | ||
###As-Welded with 100$ CO2 | 0.016 | 0.02 | 3.1-4.1 |
%C | %Mn | %Si | |
Requirements - AWS E71T-12M-JH4 As-Welded with 75$ Ar / 25$ CO2 | 0.12 max | 1.60 max | 0.90 max |
###As-Welded with 75$ Ar / 25$ CO2 | 0.03-0.06 | 1.27-1.60 | 0.27-0.45 |
%Ni | %S | %P | |
Requirements - AWS E71T-12M-JH4 As-Welded with 75$ Ar / 25$ CO2 | 0.50 max | 0.03 max | 0.03 max |
###As-Welded with 75$ Ar / 25$ CO2 | 0.34-0.41 | <0.01 | <0.01 |
%C | %Mn | %Si | %S | %P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20 - E71T-12C-JH8 As-Welded with 100$ CO2 AWS A5.36 - E71T1-C1A5-CS2-H8 As-Welded with 100$ CO2 | 0.12max | 1.75 max1.60 max | 0.90max | 0.03 max.0.030 max | 0.03 max0.030 max | 0.50max | 3.0 max |
###As-Welded with 100$ CO2 | 0.05 | 1.42 | 0.52 | 0.007 | 0.016 | 0.02 | 5.9 |
%C | %Mn | %Si | %S | %P | %Ni | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20 - E71T-12M-JH8 As-Welded with 75-80$ Ar / Balance CO2 AWS A5.36 - E71T1-M21A5-CS2-H8 E71T1-M21P5-CS2-H8 | 0.12max | 1.60 max | 0.90max | 0.03 max0.030 max | 0.03 max0.030 max | 0.50max | 8max |
###As-Welded with 75$ Ar / 25$ CO2 | 0.06 | 1.45 | 0.44 | 0.008 | 0.014 | 0.01 | 5.6 |
%C | %Mn | %Si | %S | %P | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20: E71T-1C-H8, E71T-9C-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | Not Specified | 8.0 max |
AWS A5.36: E71T1-C1A2-CS1-H8 | 0.03 max | 0.03 max | 8 max | ||||
###As-Welded with 100$ CO2 | 0.03 | 1.42 | 0.39 | 0.01 | 0.01 | 0.004 - 0.006 | 3-4 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS E71T-1C-J / E71T-1M-J | 0.12 | 1.75 | 0.90 | 0.03 | 0.03 |
AWSE71T-9C-J / E71T-9M-J | max | max | max | max | max |
###As-Welded with 100$ CO2 and 75$ Argon/25$ CO2 | 0.05-0.07 | 1.04-1.60 | 0.25-0.50 | < 0.01 | < 0.01 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS E71T-1C-H8, E71T-9C-H8 | 0.12 | 1.75 | 0.90 | 0.03 | 0.03 |
AWS E71T-1M-H8, E71T-9M-H8 | max | max | max | max | max |
###As-Welded with 100$ CO2 | 0.01-0.04 | 1.41-1.50 | 0.44-0.60 | <0.01 | <0.01 |
###As-Welded with 75$ Ar/25$ CO2 | 0.02-0.04 | 1.55-1.65 | 0.56-0.75 | <0.01 | <0.01 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS E71T-1CAWS E71T-1M | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max |
###As-Welded with 100$ CO2###As-Welded with 75$ Ar/ 25$ CO2 | 0.050.04 | 1.401.49 | 0.450.56 | 0.010.01 | 0.0160.017 |
%C | %Mn | %Si | %S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20 E70T-1C-H8, E70T-9C-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 8.0 max |
AWS A5.36 E70T1-C1A2-CS1-H8 | 0.030 max | 0.030 max | 8 max | |||
###As-Welded with 100$ CO2 | 0.04-0.05 | 1.46-1.59 | 0.54-0.59 | < 0.01 | < 0.01 | 5-8 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS A5.20 E70T-1M-H8, E70T-9M-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max |
AWS A5.36 E70T1-M21A2-CS1-H8 | 0.030 max | 0.030 max | |||
###As-Welded with 75$ Ar/ 25$ CO2 | 0.06-0.07 | 1.53-1.56 | 0.58-0.60 | 0.009 | 0.013 |
%Ni | %Mo | %Cr | %V | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20 E70T-1M-H8, E70T-9M-H8 | 0.50 max | 0.30 max | 0.20 max | 0.08 max | 8.0 max |
AWS A5.36 E70T1-M21A2-CS1-H8 | 8 max | ||||
###As-Welded with 75$ Ar/ 25$ CO2 | 0.03 | 0.01 | 0.07 | 0.03 | 4-7 |
%C | %Mn | %Si | %S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS E70T-5C-JH4 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | 4.0 max |
###As-Welded with 100$ CO2 | 0.06-0.08 | 1.51-1.66 | 0.44-0.53 | 0.01 | 0.01 | 2-4 |
%C | %Mn | %Si | %S | %P | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.20 E70T-1C-H8, E70T-9C-H8 | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max | Not Specified | 8.0 max |
AWS A5.36 E70T-1-C1A2-CS1-H8 | 0.030 max | 0.030 max | 8 max | ||||
###As-Welded with 100$ CO2 | 0.03 - 0.06 | 1.44 - 1.64 | 0.49 - 0.56 | < 0.008 | <0.016 | <0.0042 | 2-4 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E70T-1C, E70T-9C | 0.12 max | 1.75 max | 0.90 max | 0.03 max | 0.03 max |
###As-Welded with 100$ CO2 | 0.08 | 1.41-1.43 | 0.64-0.73 | 0.01 | 0.01 |
%C | %Mn | %Si | |
Requirements - AWS E70T-1C-H8, E70T-9C-H8 | 0.12 max | 1.75 max | 0.90 max |
###As-Welded with 100$ CO2 | 0.06-0.07 | 1.40-1.60 | 0.48-0.58 |
%S | %P | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS E70T-1C-H8, E70T-9C-H8 | 0.03 max | 0.03 max | 8.0 max |
###As-Welded with 100$ CO2 | <0.01 | <0.01 | 3-6 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T1-Ni1C-JH4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 |
AWS A5.36: E81T1-C1A8-Ni1-H4 | 1.75 max | |||||
###As-Welded with 100$ CO2 | 0.05-0.08 | 1.20-1.39 | 0.38-0.48 | 0.003-0.005 | 0.012-0.015 | 0.92-1.05 |
%Cr | %Mo | %V | %Cu | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.29: E81T1-Ni1C-JH4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | Not Specified | 4.0 max |
AWS A5.36: E81T1-C1A8-Ni1-H4 | 4 max | |||||
###As-Welded with 100$ CO2 | 0.02-0.03 | < 0.01 | < 0.01 | 0.22-0.25 | 0.003-0.004 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T1-Ni1M-JH4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 |
AWS A5.36: E81T1-M21A8-Ni1-H4 | 1.75 max | |||||
###As-Welded with 80$ Ar/ 20$ CO2 | 0.05-0.07 | 1.15-1.38 | 0.27-0.35 | 0.003-0.005 | 0.010-0.013 | 0.89-0.99 |
%Cr | %Mo | %V | %Cu | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements AWS A5.29: E81T1-Ni1M-JH4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | Not Specified | 4.0 max |
AWS A5.36: E81T1-M21A8-Ni1-H4 | 4 max | |||||
###As-Welded with 80$ Ar/ 20$ CO2 | 0.02-0.03 | < 0.01 | < 0.01 | 0.23-0.25 | 0.003-0.004 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements - AWS E81T1-Ni1M-JH4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 |
###As-Welded with 75$ Ar/25$ CO2 | 0.04-0.05 | 1.26-1.36 | 0.25-0.29 | 0.006-0.009 | 0.005-0.008 | 0.86-0.96 |
%Mo | %Cr | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS E81T1-Ni1M-JH4 | 0.35 max | 0.15 max | 0.05 max | Not Specified | 4.0 max | |
###As-Welded with 75$ Ar/25$ CO2 | 0.01 | 0.04-0.05 | 0.02-0.03 | 0.005-0.007 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements - AWS E81T1-Ni1C-JH4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 |
###As-Welded with 100$ CO2 | 0.04-0.05 | 1.24-1.34 | 0.27-0.31 | 0.006-0.007 | 0.007-0.009 | 0.88-0.99 |
%Mo | %Cr | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS E81T1-Ni1C-JH4 | 0.35 max | 0.15 max | 0.05 max | Not Specified | 4.0max | |
###As-Welded with 100$ CO2 | 0.01 | 0.04-0.05 | 0.02-0.03 | 0.005-0.006 | 3-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T1-Ni1C-JH4AWS A5.36: E81T1-C1A6-Ni1-H4,E81T1-C1P4-Ni1-H4 | 0.12 max | 1.50 max1.75 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 |
###Typical Results with 100$ CO2 | 0.04-0.05 | 1.29-1.37 | 0.42-0.45 | 0.007-0.008 | 0.011 | 0.89-0.95 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29: E81T1-Ni1C-JH4AWS A5.36: E81T1-C1A6-Ni1-H4,E81T1-C1P4-Ni1-H4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max4 max | |
###Typical Results with 100$ CO2 | 0.05 | 0.10 | 0.00 | 0.004-0.005 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T1-Ni1M-JH4AWS A5.36: E81T1-M21A6-Ni1-H4,E81T1-M21P4-Ni1-H4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 |
1.75 max | ||||||
###Typical Results with 75$ Argon / 25$ CO2 | 0.05-0.06 | 1.31-1.38 | 0.41-0.44 | 0.007 | 0.012 | 0.83-0.87 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29: E81T1-Ni1M-JH4AWS A5.36: E81T1-M21A6-Ni1-H4,E81T1-M21P4-Ni1-H4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###Typical Results with 75$ Argon / 25$ CO2 | 0.05 | 0.01 | 0.00 | 0.005-0.006 | 2-4 |
%C | %Mn | %Si | %S | |
Requirements - AWS E81T1-Ni2M-JH4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max |
###As-Welded with 75$ Ar/25$ CO2 | 0.04-0.05 | 0.93-1.05 | 0.25-0.28 | 0.005-0.006 |
%P | %Ni | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS E81T1-Ni2M-JH4 | 0.030 max | 1.75-2.75 | Not Specified | 4.0 max |
###As-Welded with 75$ Ar/25$ CO2 | 0.006-0.008 | 2.01-2.13 | 0.005-0.007 | 3-4 |
%C | %Mn | %Si | %S | |
Requirements - AWS E81T1-Ni2C-JH4 | 0.12 max | 1.50 max | 0.80 max | 0.030 max |
###As-Welded with 100$ CO2 | 0.04-0.05 | 1.14-1.24 | 0.27-0.32 | 0.006-0.007 |
%P | %Ni | %B | Diffusible Hydrogen (mL/100g weld deposit) | |
Requirements - AWS E81T1-Ni2C-JH4 | 0.030 max | 1.75-2.75 | Not Specified | 4.0 max |
###As-Welded with 100$ CO2 | 0.006-0.007 | 1.86-2.19 | 0.005-0.006 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements - AWS E81T1-K2M-JH4 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 |
###As-Welded with 75$ Ar/25$ CO2 | 0.04-0.05 | 0.98-1.09 | 0.25-0.28 | 0.006-0.009 | 0.005-0.008 | 1.40-1.63 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS E81T1-K2M-JH4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4 max | |
###As-Welded with 75$ Ar/25$ CO2 | 0.03-0.04 | 0.01-0.02 | 0.02-0.03 | 0.005-0.007 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements - AWS E81T1-K2C-JH4 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 |
###As-Welded with 100$ CO2 | 0.04 | 1.08-1.15 | 0.23-0.31 | 0.005-0.009 | 0.005-0.009 | 1.30-1.62 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements - AWS E81T1-K2C-JH4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max | |
###As-Welded with 100$ CO2 | 0.03-0.05 | 0.01-0.02 | 0.01-0.02 | 0.005-0.006 | 2-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T1-K2C-JH4AWS A5.36: E81T1-C1A6-K2-H4,E81T1-C1P4-K2-H4 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 |
###Typical Results | 0.05 | 1.39-1.56 | 0.30-0.36 | 0.007-0.008 | 0.013 | 1.54-1.72 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29: E81T1-K2C-JH4AWS A5.36: E81T1-C1A6-K2-H4,E81T1-C1P4-K2-H4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###Test Results | 0.07 | 0.02 | 0.01 | 0.004-0.005 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29: E81T1-K2M-JH4AWS A5.36: E81T1-M21A6-K2-H4,E81T1-M21P4-K2-H4 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 |
###Typical Results with 75$ Argon / 25$ CO2 | 0.05 | 1.28-1.30 | 0.42-0.44 | 0.007-0.009 | 0.011 | 1.45-1.60 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29: E81T1-K2M-JH4AWS A5.36: E81T1-M21A6-K2-H4,E81T1-M21P4-K2-H4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###Typical Results with 75$ Argon / 25$ CO2 | 0.05 | 0.01 | 0.00 | 0.005-0.006 | 2-4 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E91T1-K2C-JH4AWS A5.36 E91T1-C1A6-K2-H4,E91T1-C1P4-K2-H4 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 |
###As-Welded with 100$ CO2 | 0.04-0.07 | 1.39-1.73 | 0.25-0.35 | 0.006-0.008 | 0.009-0.011 | 1.33-1.66 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E91T1-K2C-JH4AWS A5.36 E91T1-C1A6-K2-H4,E91T1-C1P4-K2-H4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###As-Welded with 100$ CO2 | 0.04-0.05 | 0.22-0.29 | 0.00 | 0.003-0.004 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E91T1-K2M-JH4AWS A5.36 E91T1-M21A6-K2-H4,E91T1-M21P4-K2-H4 | 0.15 max | 0.50-1.75 | 0.80 max | 0.030 max | 0.030 max | 1.00-2.00 |
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.05 | 1.50-1.66 | 0.30-0.35 | 0.006-0.012 | 0.008-0.010 | 1.44-1.58 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E91T1-K2M-JH4AWS A5.36 E91T1-M21A6-K2-H4,E91T1-M21P4-K2-H4 | 0.15 max | 0.35 max | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.05 | 0.24-0.27 | 0.00 | 0.004-0.005 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E101T1-K3C-JH4AWS A5.36 E101T1-C1A6-K3-H4,E91T1-C1P4-K3-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.030 max | 0.030 max | 1.25-2.60 |
###As-Welded with 100$ CO2 | 0.04-0.06 | 1.44-1.89 | 0.26-0.70 | 0.006-0.008 | 0.007-0.011 | 1.68-2.09 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E101T1-K3C-JH4AWS A5.36 E101T1-C1A6-K3-H4,E91T1-C1P4-K3-H4 | 0.15 max | 0.25-0.65 | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###As-Welded with 100$ CO2 | 0.03-0.24 | 0.42-0.51 | 0.00-0.01 | 0.003-0.004 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E101T1-K3M-JH4AWS A5.36 E101T1-M21A6-K3-H4,E91T1-M21P4-K3-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.030 max | 1.25-2.600.030 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.05 | 1.60-1.71 | 0.33-0.34 | 0.007-0.008 | 0.010-0.011 | 1.89-2.17 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E101T1-K3M-JH4 | 4.0 max | |||||
AWS A5.36 E101T1-M21A6-K3-H4,E91T1-M21P4-K3-H4 | 0.15 max | 0.25-0.65 | 0.05 max | Not Specified | 4 max | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.06 | 0.39-0.44 | 0.00 | 0.004-0.005 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E111T1-K3C-JH4AWS A5.36 E111T1-C1A6-K3-H4,E101T1-C1P4-K3-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.030 max | 0.030 max | 1.25-2.60 |
###As-Welded with 100$ CO2 | 0.05-0.07 | 1.59-1.73 | 0.25-0.28 | 0.007-0.011 | 0.008-0.011 | 2.41-2.50 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E111T1-K3C-JH4AWS A5.36 E111T1-C1A6-K3-H4,E101T1-C1P4-K3-H4 | 0.15 max | 0.25-0.65 | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###As-Welded with 100$ CO2 | 0.04-0.12 | 0.41-0.49 | 0.00-0.01 | 0.003-0.004 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E111T1-K3M-JH4AWS A5.36 E111T1-M21A6-K3-H4,E101T1-M21P4-K3-H4 | 0.15 max | 0.75-2.25 | 0.80 max | 0.030 max | 0.030 max | 1.25-2.60 |
###As-Welded with 75$ Argon / 25$ CO2 | 0.05-0.06 | 1.59-1.84 | 0.27-0.34 | 0.007 | 0.010-0.011 | 2.31-2.60 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E111T1-K3M-JH4AWS A5.36 E111T1-M21A6-K3-H4,E101T1-M21P4-K3-H4 | 0.15 max | 0.25-0.65 | 0.05 max | Not Specified | 4.0 max | |
4 max | ||||||
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.07 | 0.45-0.51 | 0.00 | 0.004-0.005 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E121T1-GC-H4AWS A5.36 E121T1-C1A6-K3-H4,E111T1-C1P4-K3-H4 | Not Specified | 0.50 | 1.00 max | 0.030 max | 0.030 max | 0.50 |
0.15 max | 0.75-2.25 | 0.80 max | 0.030 max | 0.030 max | 1.25-2.60 | |
###As-Welded with 100$ CO2 | 0.06-0.07 | 1.56-1.88 | 0.24-0.29 | 0.007-0.012 | 0.010-0.011 | 2.21-2.50 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E121T1-GC-H4AWS A5.36 E121T1-C1A6-K3-H4,E111T1-C1P4-K3-H4 | 0.30 | 0.20 | 0.10 | Not Specified | 4.0 max | |
0.15 max | 0.25-0.65 | 0.05 max | 4 max | |||
###As-Welded with 100$ CO2 | 0.04-0.07 | 0.53-0.67 | 0.00 | 0.003-0.004 | 1-3 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E121T1-GM-H4AWS A5.36 E121T1-M21A6-K3-H4,E111T1-M21P4-K3-H4 | Not Specified | 0.50 | 1.00 max | 0.030 max | 0.030 max | 0.50 |
0.15 max | 0.75-2.25 | 0.80 max | 0.030 max | 0.030 max | 1.25-2.60 | |
###As-Welded with 75$ Argon / 25$ CO2 | 0.06-0.07 | 1.61-1.80 | 0.26-0.35 | 0.007-0.012 | 0.010-0.011 | 2.21-2.46 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E121T1-GM-H4AWS A5.36 E121T1-M21A6-K3-H4,E111T1-M21P4-K3-H4 | 0.30 | 0.20 | 0.10 | Not Specified | 4.0 max | |
0.15 max | 0.25-0.65 | 0.05 max | 4 max | |||
###As-Welded with 75$ Argon / 25$ CO2 | 0.04-0.07 | 0.58- 0.65 | 0.00 | 0.004-0.005 | 1-3 |
%C | %Mn | %Si | %S | |
Requirements AWS E81T1-B2C-H4 | 0.05-0.12 | 1.25 max | 0.80 max | 0.030 max |
###Typical Results | 0.06 | 0.8 | 0.3 | 0.01 |
%P | %Cr | %Mo | %Cu | |
Requirements AWS E81T1-B2C-H4 | 0.030 max | 1.00-1.50 | 0.40-0.65 | 0.3 max |
###Typical Results | 0.01 | 1.3 | 0.5 | 0.05 |
%C | %Mn | %Si | %S | |
Requirements AWS E91T1-B3C/M-H4 | 0.05 - 0.12 | 1.25 max | 0.80 max | 0.030 max |
###Typical Results | 0.06 | 1.0 | 0.30 | 0.01 |
%P | %Cr | %Mo | %Cu | |
Requirements AWS E91T1-B3C/M-H4 | 0.030 max | 2.00 - 2.50 | 0.90 - 1.20 | 0.30 max |
###Typical Results | 0.01 | 2.3 | 1.0 | 0.05 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS E81T1-B6C/M | 0.05-0.10 | 1.20 max | 0.50 max | 0.030 max | 0.030 max |
###Typical Results | 0.06 | 0.8 | 0.3 | 0.01 | 0.01 |
%Cr | %Ni | %Mo | %Cu | ||
Requirements AWS E81T1-B6C/M | 4.0-6.0 | 0.40 max | 0.45-0.65 | 0.3 max | |
###Typical Results | 5 | 0.01 | 0.5 | 0.05 |
%C | %Mn | %Si | %S | %P | %Cr | %Ni | |
Requirements AWS E91T1-B9C/M-H4 | 0.08 - 0.13 | 0.60 - 1.20 | 0.50 max | 0.015 max | 0.020 max | 8.0 - 10.0 | 0.80 max |
###Typical Results | 0.10 | 0.80 | 0.30 | 0.01 | 0.016 | 9.0 | 0.50 |
%Mo | %Nb | %V | %N | %Cu | %Al | %Ni+Mn | |
Requirements AWS E91T1-B9C/M-H4 | 0.85 - 1.2 | 0.02 - 0.07 | 0.15 - 0.25 | 0.02 - 0.07 | 0.15 max | 0.40 max | 1.5 max |
###Typical Results | 1.0 | 0.04 | 0.20 | 0.05 | 0.05 | 0.01 | 1.30 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E80T1-Ni1C-JH8 AWS A5.36 E80T1-C1A4-Ni1-H8 | 0.12 max | 1.50 max | 0.80 max | 0.03 max | 0.03 max | 0.80-1.10 |
0.12 max | 1.75 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 | |
###Typical Results ###As-Welded with 100$ CO2 | 0.04-0.07 | 1.32-1.45 | 0.52-0.59 | 0.006-0.008 | 0.013-0.016 | 0.81-1.03 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E80T1-Ni1C-JH8 AWS A5.36 E80T1-C1A4-Ni1-H8 | 0.15 max | 0.35 max | 05 max | Not Specified | 8.0 max | |
0.15 max | 0.35 max | 0.05 max | 8 max | |||
###Typical Results ###As-Welded with 100$ CO2 | 0.04-0.09 | 0.01 | 0.02-0.03 | 0.003-0.005 | 3.4-5.6 |
%C | %Mn | %Si | %S | %P | %Ni | |
Requirements AWS A5.29 E80T1-Ni1M-JH8AWS A5.36 E80T1-M21A4-Ni1-H8 | 0.12 max | 1.50 max | 0.80 max | 0.03 max | 0.03 max | 0.80-1.10 |
0.12 max | 1.75 max | 0.80 max | 0.030 max | 0.030 max | 0.80-1.10 | |
###As-Welded with 100$ CO2 | 0.04-0.06 | 1.32-1.36 | 0.54-0.55 | 0.004-0.006 | 0.011-0.012 | 0.91-1.04 |
%Cr | %Mo | %V | %B | Diffusible Hydrogen (mL/100g weld deposit) | ||
Requirements AWS A5.29 E80T1-Ni1M-JH8AWS A5.36 E80T1-M21A4-Ni1-H8 | 0.15 max | 0.35 max | 05 max | Not Specified | 8.0 max | |
0.15 max | 0.35 max | 0.05 max | 8 max | |||
###As-Welded with 100$ CO2 | 0.04-0.06 | 0.01 | 0.02 | 0.004-0.005 | 2.9-4.6 |
%C | %Mn | %Si | %Cr | %Ni | |
###Typical Results | 0.08 | 7.1 | 0.80 | 18.8 | 8.6 |
%S | %P | %Mo | %Cu | %FN | |
###Typical Results | 0.009 | 0.023 | - | - | - |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER308H | 0.04 - 0.08 | 19.5 - 22.0 | 9.00 - 11.00 | 0.50 max | 1.0 - 2.5 |
###Typical Results | 0.06 | 19.9 | 9.7 | 0.07 | 1.8 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER308H | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.44 | 0.02 | 0.006 | 0.10 | 5 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER308LSi | 0.03 max | 19.5-22.0 | 9.0-11.0 | 0.75 max | 1.0-2.5 |
###Typical Results | 0.01 | 19.9 | 10.0 | 0.16 | 2.1 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER308LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.88 | 0.02 | 0.01 | 0.05 | 0.17 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER308L | 0.03 max | 19.5 - 22.0 | 9.00 - 11.00 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.01 | 19.7 | 9.7 | 0.17 | 1.7 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER308L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.37 | 0.02 | 0.01 | 0.18 | 8 - 14 |
As Required per AWS A5.9 | |||||
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER308L | 0.03 max | 19.5 - 22.0 | 9.00 - 11.00 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.01 | 19.7 | 9.7 | 0.17 | 1.7 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER308L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.37 | 0.02 | 0.01 | 0.18 | 3-6 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER309LSi | 0.03 max | 23.0-25.0 | 12.0-14.0 | 0.75 max | 1.0-2.5 |
###Typical Results | 0.03 | 23.5 | 13.7 | 0.28 | 2.0 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER309LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.89 | 0.02 | 0.01 | 0.06 | 0.22 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER309L | 0.03 max | 23.0 - 25.0 | 12.0 - 14.0 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.01 | 23.4 | 13.6 | 0.06 | 1.6 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER309L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.38 | 0.02 | 0.007 | 0.07 | 9 - 14 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER309LMo | 0.03 max | 23.0 - 25.0 | 12.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 22.3 | 15.0 | 2.6 | 1.40 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER309LMo | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.40 | 0.02 | 0.01 | 0.10 | 6 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER310 | 0.08 - 0.15 | 25.0 - 28.0 | 20.0 - 22.5 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.11 | 27.1 | 21.0 | 1.90 | |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER310 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.40 | 0.01 | 0.003 | 0.04 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER312 | 0.15 max | 28.0 - 32.0 | 8.0 - 10.5 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.11 | 29.6 | 8.9 | 1.6 | |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER312 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.44 | 0.02 | 0.01 | 0.10 | 50 - 80 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER316L | 0.03 max | 18.0 - 20.0 | 11.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 18.5 | 12.1 | 2.4 | 1.6 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER316L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.36 | 0.02 | 0.01 | 0.09 | 6 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER316L | 0.03 max | 18.0 - 20.0 | 11.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 18.5 | 12.1 | 2.4 | 1.6 |
%Si | %P | %S | %Cu | FN | |
Requirements - AWS ER316L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.36 | 0.02 | 0.01 | 0.09 | 6 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER316LSi | 0.03 max | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 1.0-2.5 |
###Typical Results | 0.02 | 18.9 | 11.8 | 2.2 | 2.1 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER316LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.81 | 0.02 | 0.01 | 0.05 | 0.23 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER317L | 0.03 max. | 18.5 - 20.5 | 13.0 - 15.0 | 3.0 - 4.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 18.9 | 13.7 | 3.5 | 1.4 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER317L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.45 | 0.01 | 0.008 | 0.08 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER320LR | 0.025 max | 19.0 - 21.0 | 32.0 - 36.0 | 2.0 - 3.0 | 1.5 - 2.0 |
###Typical Results | 0.003 | 20.1 | 33.3 | 2.4 | 1.7 |
%Si | %P | %S | %Cu | %Nb | |
Requirements AWS ER320LR | 0.15 max | 0.015 max | 0.02 max | 3.0 - 4.0 | Required8 x C / 1.0 max |
###Typical Results | 0.01 | 0.010 | 0.001 | 3.3 | 0.22 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER330 | 0.18 - 0.25 | 15.0 - 17.0 | 34.0 - 37.0 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.23 | 15.9 | 35.2 | 1.9 | |
%Si | %P | %S | %Cu | ||
Requirements AWS ER330 | 0.30 - 0.65 | 0.03 | 0.03 | 0.75 max | |
###Typical Results | 0.42 | 0.01 | 0.005 | 0.10 |
%C | %Cr | %Ni | %Mo | %Nb + Ta | |
Requirements AWS ER347 | 0.08 max | 19.0 - 21.5 | 9.0 - 11.0 | 0.75 max | 10хС - 1.0 |
###Typical Results | 0.03 | 19.5 | 9.3 | 0.25 | 0.60 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER347 | 1.0 - 2.5 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max |
###Typical Results | 1.7 | 0.45 | 0.01 | 0.007 | 0.10 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER385 | 0.025 max | 19.5 - 21.5 | 24.0 - 26.0 | 4.2 - 5.2 | 1.0 - 2.5 |
###Typical Results | 0.010 | 19.9 | 25.0 | 4.2 | 1.8 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER385 | 0.50 max | 0.02 max | 0.03 max | 1.2 - 2.0 | |
###Typical Results | 0.3 | 0.01 | 0.001 | 1.4 |
%C | %Cr | %Ni | %Mo | %Nb | |
Requirements AWS ER409Nb | 0.08 max | 10.5 - 13.5 | 0.6 max | 0.50 max | 0.075 max |
###Typical Results | 0.04 | 11.5 | 0.4 | 0.03 | 0.50 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER409Nb | 0.8 max | 1.0 max | 0.04 max | 0.03 max | 0.75 max |
###Typical Results | 0.62 | 0.48 | 0.02 | 0.02 | 0.04 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER409Nb | 0.08 max | 10.5 - 13.5 | 0.6 max | 0.5 max | 0.75 max |
###Typical Results | 0.04 | 11.5 | 0.4 | 0.03 | 0.50 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER409Nb | 0.8 max | 1.0 max | 0.04 max | 0.03 max | 0.75 max |
###Typical Results | 0.62 | 0.48 | 0.02 | 0.02 | 0.04 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER410 | 0.12 max | 11.5 - 13.5 | 0.6 max | 0.75 max | 0.6 max |
###Typical Results | 0.11 | 12.5 | 0.1 | 0.03 | 0.45 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER410 | 0.5 max | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.39 | 0.01 | 0.01 | 0.14 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER410NiMo | 0.06 max | 11.0 - 12.5 | 4.0 - 5.0 | 0.4 - 0.7 | 0.6 max |
###Typical Results | 0.02 | 11.7 | 4.7 | 0.5 | 0.2 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER410NiMo | 0.5 max | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.2 | 0.01 | 0.002 | 0.06 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS ER420 | 0.25-0.40 | 0.60 | 0.50 | 0.03 | 0.03 |
###Typical Results | 0.32 | 0.30 | 0.30 | 0.01 | 0.02 |
%Cr | %Ni | %Mo | %Cu | ||
Requirements AWS ER420 | 12.0-14.0 | 0.60 | 0.75 | 0.75 | |
###Typical Results | 13.20 | 0.20 | 0.03 | 0.02 |
%C | %Cr | %Ni | %Mo | %Nb | |
Requirements AWS ER630 | 0.05 max | 16.00 - 16.75 | 4.5 - 5.0 | 0.75 max | 0.15 - 0.30 |
###Typical Results | 0.03 | 16.5 | 4.8 | 0.2 | 0.22 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER630 | 0.25 - 0.75 | 0.75 max | 0.03 max | 0.03 max | 3.25 - 4.0 |
###Typical Results | 0.54 | 0.43 | 0.02 | 0.02 | 3.6 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements AWS ER2209 | 0.03 max | 21.5 - 23.5 | 7.5 - 9.5 | 2.5 - 3.5 | 0.5 - 2.0 | 0.90 max |
###Typical Results | 0.01 | 22.7 | 8.5 | 3.0 | 1.4 | 0.4 |
%P | %S | %N | %Cu | FN | ||
Requirements AWS ER2209 | 0.03 max | 0.03 max | 0.08 - 0.20 | 0.75 max | Not Required | |
###Typical Results | 0.01 | 0.001 | 0.15 | 0.06 | 30 - 60 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements AWS ER2594 | 0.03 max | 24.0 - 27.0 | 8.0 - 10.5 | 2.5 - 4.5 | 2.5 max | 1.0 max |
###Typical Results | 0.02 | 24.6 | 8.6 | 3.8 | 0.8 | 0.3 |
%P | %S | %N | %Cu | %W | FN | |
Requirements AWS ER2594 | 0.03 max | 0.02 max | 0.20 - 0.30 | 1.5 max | 1.00 max | Not Required |
###Typical Results | 0.02 | 0.01 | 0.25 | 0.01 | 0.01 | 30 - 60 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER308Si, ER308LSi | 0.03 max | 19.5-22.0 | 9.0-11.0 | 0.75 max | 1.0-2.5 |
###Typical Results | 0.01 | 19.9 | 10.0 | 0.16 | 2.1 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER308Si, ER308LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.88 | 0.02 | 0.01 | 0.05 | 0.17 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER309Si, ER309LSi | 0.03 max | 23.0-25.0 | 12.0-14.0 | 0.75 max | 1.0-2.5 |
###As-Welded | 0.03 | 23.5 | 13.7 | 0.28 | 2.0 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER309Si, ER309LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###As-Welded | 0.89 | 0.02 | 0.01 | 0.06 | 0.22 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER316Si, ER316LSi | 0.03 max | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 1.0-2.5 |
###Typical Results | 0.02 | 18.9 | 13.7 | 2.3 | 2.0 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER316Si, ER316LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.89 | 0.02 | 0.01 | 0.06 | 0.22 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER308LSi | 0.03 max | 19.5-22.0 | 9.0-11.0 | 0.75 max | 1.0-2.5 |
###Typical Results | 0.02 | 19.9 | 9.6 | 0.08 | 2.0 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER308LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.81 | 0.02 | 0.02 | 0.05 | 0.06 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER309LSi | 0.03 max | 23.0-25.0 | 12.0-14.0 | 0.75 max | 1.0-2.5 |
###Typical Results | 0.02 | 23.4 | 13.7 | 0.30 | 2.1 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER309LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.77 | 0.02 | <0.01 | 0.09 | 0.09 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER316LSi | 0.03 max | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 1.0-2.5 |
###Typical Results | 0.02 | 18.3 | 11.3 | 2.2 | 1.6 |
%Si | %P | %S | %N | %Cu | |
Requirements - AWS ER316LSi | 0.65-1.00 | 0.03 max | 0.03 max | Not Specified | 0.75 max |
###Typical Results | 0.82 | 0.02 | 0.02 | 0.07 | 0.10 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E308LT0-1, E308LT0-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max |
###Typical Results - with 100$ CO2 | <0.03 | 1.2-1.3 | 0.60-0.70 | <0.02 | <0.02 |
###with 75$ Ar/25$ CO2 | <0.03 | 1.2-1.3 | 0.68-0.77 | <0.01 | <0.02 |
%Ni | %Cr | %Mo | %Cu | ||
Requirements - AWS E308LT0-1, E308LT0-4 | 9.0-11.0 | 18.0-21.0 | 0.5 max | 0.5 max | |
###Typical Results - with 100$ CO2 | 9.3-9.7 | 18.2-18.5 | <0.27 | <0.31 | |
###with 75$ Ar/25$ CO2 | 9.3-9.7 | 18.7-18.9 | <0.27 | <0.27 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E308LT1-1 & E308LT1-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max |
###As-Welded with 100$ CO2 | < 0.03 | 1.2-1.3 | 0.6-0.7 | < 0.01 | < 0.02 |
###As-Welded with 75$ Ar/25$ CO2 | < 0.03 | 1.4-1.5 | 0.7-0.8 | < 0.01 | < 0.02 |
%Ni | %Cr | %Mo | %Cu | %Bi | |
Requirements - AWS E308LT1-1 & E308LT1-4 | 9.0-11.0 | 18.0 - 21.0 | 0.75 max | 0.75 max | - |
###As-Welded with 100$ CO2 | 9.5-9.9 | 18.0 - 18.6 | < 0.20 | < 0.25 | 0.01-0.02 |
###As-Welded with 75$ Ar/25$ CO2 | 9.7-9.9 | 18.5 - 19.0 | < 0.20 | < 0.25 | 0.01-0.02 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E309LTO-1 & E309LTO-4 | 0.04 max | 0.5 - 2.5 | 1.0 max | 0.03 max | 0.04 max |
###As-Welded with 100$ CO2 | <0.03 | 1.3-1.5 | 0.65-0.75 | <0.01 | <0.02 |
###As-Welded with 75$ Ar/25$ CO2 | <0.03 | 1.2-1.5 | 0.72-0.78 | <0.01 | <0.02 |
%Ni | %Cr | %Mo | %Cu | ||
Requirements - AWS E309LTO-1 & E309LTO-4 | 12.0 - 14.0 | 22.0 - 25.0 | 0.5 max. | 0.5 max. | |
###As-Welded with 100$ CO2 | 12.2-12.8 | 22.6 - 23.9 | <0.27 | <0.31 | |
###As-Welded with 75$ Ar/25$ CO2 | 12.2-12.8 | 23.0 - 24.0 | <0.23 | <0.27 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E309LT1-1 & E309LT1-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max |
###As-Welded with 100$ CO2 | <0.03 | 1.0 | 0.8 | < 0.01 | < 0.02 |
###As-Welded with 75$ Ar/25$ CO2 | <0.03 | 1.0 | 0.9 | < 0.01 | < 0.02 |
%Ni | %Cr | %Mo | %Cu | %Bi | |
Requirements - AWS E309LT1-1 & E309LT1-4 | 12.0 - 14.0 | 22.0 - 25.0 | 0.75 max | 0.75 max | - |
###As-Welded with 100$ CO2 | 12.8-13.2 | 23.6-23.9 | < 0.20 | < 0.25 | 0.01-0.02 |
###As-Welded with 75$ Ar/25$ CO2 | 12.9-13.3 | 23.9-24.1 | < 0.20 | < 0.25 | 0.01-0.02 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E316LT0-1 & E316LT0-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max |
###As-Welded with 100$ CO2 | <0.03 | 1.2-1.3 | 0.60 - 0.70 | <0.01 | <0.02 |
###As-Welded with 75$ Ar/25$ CO2 | <0.03 | 1.1-1.4 | 0.70 - 0.73 | <0.01 | <0.02 |
%Ni | %Cr | %Mo | %Cu | ||
Requirements - AWS E316LT0-1 & E316LT0-4 | 11.0 - 14.0 | 17.0 - 20.0 | 2.0 - 3.0 | 0.5 max | |
###As-Welded with 100$ CO2 | 11.3-12.2 | 17.7-18.3 | <2.87 | <0.35 | |
###As-Welded with 75$ Ar/25$ CO2 | 11.2-11.6 | 17.7-18.3 | <2.66 | <0.27 |
%C | %Mn | %Si | %S | %P | |
Requirements - AWS E316LT1-1 & E316LT1-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max |
###As-Welded with 100$ CO2 | < 0.03 | 1.0 | 0.6 | < 0.01 | < 0.02 |
###As-Welded with 75$ Ar/25$ CO2 | < 0.03 | 1.1 | 0.7 | < 0.01 | < 0.02 |
%Ni | %Cr | %Mo | %Cu | %Bi | |
Requirements - AWS E316LT1-1 & E316LT1-4 | 11.0-14.0 | 17.0-20.0 | 2.0 - 3.0 | 0.75 max | - |
###As-Welded with 100$ CO2 | 12.3-12.5 | 18.0-18.5 | 2.5 - 2.8 | < 0.25 | 0.02-0.03 |
###As-Welded with 75$ Ar/25$ CO2 | 12.3-12.5 | 18.5-19.0 | 2.5 - 2.8 | < 0.25 | 0.02-0.03 |
%C | %Mn | %Si | %S | %P | |
Requirements As-Welded with 80$ Ar/20$ CO2 | 0.04 max | 0.5 - 2.5 | 1.0 max | 0.03 max | 0.04 max |
###Typical Results | 0.03 | 1.4 | 0.6 | 0.01 | 0.02 |
%Cr | %Ni | %Mo | %Cu | %FN | |
Requirements As-Welded with 80$ Ar/20$ CO2 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.75 | Not Specified |
###Typical Results | 18.6 | 10.5 | 0.1 | 0.1 | 3 |
%C | %Mn | %Si | %S | %P | |
Requirements As-Welded with 80$ Ar/20$ CO2 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max |
###Typical Results | 0.03 | 1.4 | 0.6 | 0.01 | 0.02 |
%Cr | %Ni | %Mo | %Cu | %FN | |
Requirements As-Welded with 80$ Ar/20$ CO2 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.75 | Not Specified |
###Typical ResultsTYPICAL OPERATING PROCED | 18.0URES | 12.4 | 2.2 | 0.1 | 3 |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS E347T0-1/4 | 0.08 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max | 18.0-21.0 |
###Typical Results | 0.03 | 1.2 | 0.4 | 0.01 | 0.02 | 19 |
%Ni | %Mo | %Nb | %Cu | FN | ||
Requirements AWS E347T0-1/4 | 9.0-11.0 | 0.75 max | 8 x C min - 1.0 max | 0.75 max | 4 - 12 | |
###Typical Results | 10.5 | 0.1 | 0.5 | 0.1 | 8.0 |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS E2209T1-1/4 | 0.04 max | 0.5-2.0 | 1.0 max | 0.03 max | 0.04 max | 21.0 - 24.0 |
###Typical Results | 0.03 | 1.2 | 0.7 | <0.01 | 0.02 | 23 |
%Ni | %Mo | %Cu | %N | PRE | ||
Requirements AWS E2209T1-1/4 | 7.5-10.0 | 2.5-4.0 | 0.75 max | 0.08-0.20 | Not Specified | |
###Typical Results | 9.2 | 3.1 | 0.1 | 0.12 | 35.0 |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS E2594T0-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max | 24.0-27.0 |
###Typical Results | 0.03 | 1.0 | 0.50 | 0.01 | 0.02 | 24.5 |
%Ni | %Mo | %Cu | %W | %N | PRE | |
Requirements AWS E2594T0-4 | 8.0-10.5 | 2.5-4.5 | 1.5 max | 1.0 max | 0.20-0.30 | Not Specified |
###Typical Results | 9.3 | 3.8 | 0.05 | 0.05 | 0.23 | 41 |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS E2594T1-4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.03 max | 0.04 max | 24.0-27.0 |
###Typical Results | 0.03 | 1.0 | 0.50 | 0.01 | 0.02 | 24.5 |
%Ni | %Mo | %Cu | %W | %N | PRE | |
Requirements AWS E2594T1-4 | 8.0-10.5 | 2.5-4.5 | 1.5 max | 1.0 max | 0.20-0.30 | 40 min |
###Typical Results | 9.3 | 3.8 | 0.05 | 0.05 | 0.23 | 41 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS E308HT1-1/4 | 0.04-0.08 | 0.5 - 2.5 | 1.0 max | 0.03 max | 0.04 max |
###Typical Results | 0.05 | 1.3 | 0.5 | 0.01 | 0.02 |
%Cr | %Ni | %Mo | %Cu | FN | |
Requirements AWS E308HT1-1/4 | 18.0 - 21.0 | 9.0-11.0 | 0.75 max | 0.75 max | Not Specified |
###Typical Results | 18.8 | 9.5 | 0.1 | 0.1 | 5 |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS E317LT1-1/4 | 0.04 max | 0.5-2.5 | 1.0 max | 0.3 max | 0.04 max | 18.0-21.0 |
###Typical Results | 0.03 | 1.0 | 0.6 | 0.02 | 0.02 | 19.0 |
%Ni | %Mo | %Cu | %N | FN | ||
Requirements AWS E317LT1-1/4 | 12.0-14.0 | 3.0-4.0 | 0.75 max | Not Specified | Not specified | |
###Typical Results | 13 | 3.5 | 0.1 | 0.07 | 6 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS E410NiMoT1-1/4 | 0.06 max | 1.0 max | 1.0 max | 0.03 max | 0.04 max |
###Typical Results | 0.03 | 0.7 | 0.4 | 0.005 | 0.017 |
%Cr | %Ni | %Mo | %Cu | %Co | |
Requirements AWS E410NiMoT1-1/4 | 11.0-12.5 | 4.0-5.0 | 0.40 - 0.70 | 0.75 max | Not Specified |
###Typical Results | 11.8 | 4.5 | 0.5 | 0.03 | 0.03 |
%C | %Mn | %Si | %S | %P | |
###Typical Results | 0.05 | 1.2 | 0.5 | 0.01 | 0.02 |
%Cr | %Ni | %Mo | %Cu | FN | |
###Typical Results | 16.2 | 9.2 | 1.1 | 0.1 | 4 |
%C | %Mn | %Si | %S | %P | %Cr | |
###Typical Results | 0.03 | 1.0 | 0.5 | 0.05 | 0.02 | 24.5 |
%Ni | %Mo | %Cu | %N | %W | PRE | |
###Typical Results | 9.1 | 3.7 | 0.6 | 0.22 | 0.6 | 41 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements - AWS ER308, ER308L | 0.03 max | 19.5-22.0 | 9.0-11.0 | 0.75 max | 1.0 - 2.5 | 0.30 - 0.65 |
###Wire Composition | 0.02 | 20.1 | 9.8 | 0.10 | 1.8 | 0.50 |
###All Weld Metal Composition | 0.02 | 19.0 - 19.5 | 9.8 | 0.10 | 1.5 - 1.9 | 0.50 - 0.80 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER308H | 0.04 - 0.08 | 19.5 - 22.0 | 9.00 - 11.00 | 0.50 max | 1.0 - 2.5 |
###Typical Results | 0.06 | 19.9 | 9.7 | 0.07 | 1.8 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER308H | 0.30 - 0.65 | 0.04 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.44 | 0.02 | 0.006 | 0.10 | 5 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER308/308L | 0.03 max | 19.5-22.0 | 9.0-11.0 | 0.75 max | 1.0-2 |
###Typical Results | 0.03 | 19.9 | 10.8 | 0.12 | 1.8 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER308/308L | 0.30-0.65 | 0.03 max | 0.03 max | 0.75 max | Not required |
###Typical Results | 0.35 | 0.02 | 0.01 | 0.14 | 3-8 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER309LMo | 0.03 max | 23.0 - 25.0 | 12.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 22.3 | 15.0 | 2.6 | 1.40 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER309LMo | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.40 | 0.02 | 0.01 | 0.10 | 6 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER310 | 0.08 - 0.15 | 25.0 - 28.0 | 20.0 - 22.5 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.11 | 27.1 | 21.0 | 1.90 | |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER310 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.40 | 0.01 | 0.003 | 0.04 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements - AWS ER309, ER309L | 0.03 max | 23.0 - 25.0 | 12.0 - 14.0 | 0.75 max | 1.0 - 2.5 | 0.30 - 0.65 |
###Wire Composition | 0.02 | 23.9 | 13.0 | 0.15 | 1.8 | 0.50 |
###All Weld Metal Composition | 0.03 | 23.1 - 23.6 | 13.0 | 0.15 | 1.5 - 2.0 | 0.50 - 0.80 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements - AWS ER316, ER316L | 0.03 max | 18.0 - 20.0 | 11.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 | 0.30 - 0.65 |
###As-Welded | 0.02 | 19.0 | 11.9 | 2.2 | 1.8 | 0.50 |
###All Weld Metal Composition | 0.02 | 17.8 - 18.4 | 11.9 | 2.2 | 1.6 - 2.0 | 0.50 - 0.80 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER317L | 0.03 max | 18.5 - 20.5 | 13.0 - 15.0 | 3.0 - 4.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 18.9 | 13.7 | 3.5 | 1.4 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER317L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.45 | 0.01 | 0.008 | 0.08 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER320LR | 0.025 max | 19.0 - 21.0 | 32.0 - 36.0 | 2.0 - 3.0 | 1.5 - 2.0 |
###Typical Results | 0.003 | 20.1 | 33.3 | 2.4 | 1.7 |
%Si | %P | %S | %Cu | %Nb | |
Requirements AWS ER320LR | 0.15 max | 0.015 max | 0.02 max | 3.0 - 4.0 | Required8 x C / 1.0 max |
###Typical Results | 0.01 | 0.010 | 0.001 | 3.3 | 0.22 |
%C | %Cr | %Ni | %Mo | %Nb + %Ta | |
Requirements AWS ER347 | 0.008 max | 19.0 - 21.5 | 9.0 - 11.0 | 0.75 max | 10 x C - 1.0 |
###Typical Results(2) | 0.03 | 19.5 | 9.3 | 0.25 | 0.60 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER347 | 1.0 - 2.5 | 0.3 - 0.65 | 0.03 max | 0.03 max | 0.75 max |
###Typical Results(2) | 1.7 | 0.45 | 0.01 | 0.007 | 0.10 |
%C | %Cr | %Ni | %Mo | %Nb + %Ta | |
Requirements AWS ER347 | 0.008 max | 19.0 - 21.5 | 9.0 - 11.0 | 0.75 max | 10 x C - 1.0 |
###Typical Results | 0.03 | 19.5 | 9.3 | 0.25 | 0.60 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER347 | 1.0 - 2.5 | 0.3 - 0.65 | 0.03 max | 0.03 max | 0.75 max |
###Typical Results | 1.7 | 0.45 | 0.01 | 0.007 | 0.10 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER385 | 0.025 max | 19.5 - 21.5 | 24.0 - 26.0 | 4.2 - 5.2 | 1.0 - 2.5 |
###Typical Results | 0.010 | 19.9 | 25.0 | 4.2 | 1.8 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER385 | 0.50 max | 0.02 max | 0.03 max | 1.2 - 2.0 | |
###Typical Results | 0.3 | 0.01 | 0.001 | 1.4 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER410NiMo | 0.06 max | 11.0 - 12.5 | 4.0 - 5.0 | 0.4 - 0.7 | 0.6 max |
###Typical Results | 0.02 | 11.7 | 4.7 | 0.5 | 0.2 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER410NiMo | 0.5 max | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.2 | 0.01 | 0.002 | 0.06 |
%C | %Cr | %Ni | %Mo | %Nb | |
Requirements AWS ER630 | 0.05 ma | 16.00 - 16.75 | 4.5 - 5.0 | 0.75 max | 0.15 - 0.30 |
###Typical Results | 0.03 | 16.5 | 4.8 | 0.2 | 0.22 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER630 | 0.25 - 0.75 | 0.75 max | 0.03 max | 0.03 max | 3.25 - 4.0 |
###Typical Results | 0.54 | 0.43 | 0.02 | 0.02 | 3.6 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements AWS ER2209 | 0.03 max | 21.5 - 23.5 | 7.5 - 9.5 | 2.5 - 3.5 | 0.5 - 2.0 | 0.90 max |
###Typical Results | 0.01 | 22.7 | 8.5 | 3.0 | 1.4 | 0.4 |
%P | %S | %N | %Cu | FN | ||
Requirements AWS ER2209 | 0.03 max | 0.03 max | 0.08 - 0.20 | 0.75 max | Not Required | |
###Typical Results | 0.01 | 0.001 | 0.15 | 0.06 | 30 - 60 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements AWS ER2594 | 0.03 max | 24.0 - 27.0 | 8.0 - 10.5 | 2.5 - 4.5 | 2.5 max | 1.0 max |
###Typical Results | 0.02 | 24.6 | 8.6 | 3.8 | 0.8 | 0.3 |
%P | %S | %N | %Cu | %W | FN | |
Requirements AWS ER2594 | 0.03 max | 0.02 max | 0.20 - 0.30 | 1.5 max | 1.00 max | Not Required |
###Typical Results | 0.02 | 0.01 | 0.25 | 0.01 | 0.01 | 30 - 60 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS ER16-8-2 | 0.04-0.10 | 1.0-2.0 | 0.3-0.6 | 0.02 max | 0.03 max |
###Typical Results | 0.06 | 1.4 | 0.4 | 0.01 | 0.01 |
%Cr | %Ni | %Mo | %Cu | ||
Requirements AWS ER16-8-2 | 14.5-16.5 | 7.5-9.5 | 1.0-2.0 | 0.3 max | |
###Typical Results | 15.5 | 8.5 | 1.3 | 0.1 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER308H | 0.04 - 0.08 | 19.5 - 22.0 | 9.00 - 11.00 | 0.50 max | 1.0 - 2.5 |
###Typical Results | 0.06 | 19.9 | 9.7 | 0.07 | 1.8 |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER308H | 0.30 - 0.65 | 0.04 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.44 | 0.02 | 0.006 | 0.10 | 5 - 12 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER308L | 0.03 max | 19.5 - 22.0 | 9.0 -11.0 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.02 | 20.2 | 9.2 | 0.03 | 1.6 |
%Si | %P | %S | %Cu | Total Others | |
Requirements - AWS ER308L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | 0.50 max |
###Typical Results | 0.44 | 0.02 | 0.02 | 0.11 | 0.03 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER308L | 0.03 max | 19.5 - 22.0 | 9.0 -11.0 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.02 | 20.0 | 10.9 | 0.12 | 1.7 |
%Si | %P | %S | %Cu | Total Others | |
Requirements - AWS ER308L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.53 | 0.02 | 0.01 | 0.17 | 3-6 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER309L | 0.03 max | 23.0 - 25.0 | 12.0 - 14.0 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.02 | 23.7 | 13.9 | 0.04 | 1.8 |
%Si | %P | %S | %Cu | Total Others | |
Requirements - AWS ER309L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | 0.50 max |
###Typical Results | 0.51 | 0.02 | 0.01 | 0.05 | 0.06 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER310 | 0.08 - 0.15 | 25.0 - 28.0 | 20.0 - 22.5 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.11 | 27.1 | 21.0 | 1.90 | |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER310 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.40 | 0.01 | 0.003 | 0.04 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER312 | 0.15 max | 28.0 - 32.0 | 8.0 - 10.5 | 0.75 max | 1.0 - 2.5 |
###Typical Results | 0.11 | 29.6 | 8.9 | 1.6 | |
%Si | %P | %S | %Cu | FN | |
Requirements AWS ER312 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | Not Required |
###Typical Results | 0.44 | 0.02 | 0.01 | 0.10 | 50 - 80 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER316L | 0.03max | 18.0 - 20.0 | 11.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 |
###Typical Results | 0.02 | 18.7 | 11.8 | 2.3 | 1.7 |
%Si | %P | %S | %Cu | Total Others | |
Requirements - AWS ER316L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | 0.50 max |
###Typical Results47 | 0.52 | 0.02 | 0.01 | 0.10 | 0.30 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements - AWS ER316L | 0.03 max | 18.0 - 20.0 | 11.0 - 14.0 | 2.0 - 3.0 | 1.0 - 2.5 |
###Typical Results | 0.02 | 18.5 | 12.3 | 2.6 | 1.7 |
%Si | %P | %S | %Cu | Total Others | |
Requirements - AWS ER316L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | 0.50 max |
###Typical Results | 0.40 | 0.02 | 0.01 | 0.17 | 0.30 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER317/317L | 0.03 max | 18.5 - 20.5 | 13.0 - 15.0 | 3.0 - 4.0 | 1.0 - 2.5 |
###Typical Results | 0.01 | 18.9 | 13.7 | 3.5 | 1.4 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER317/317L | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.45 | 0.01 | 0.008 | 0.08 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER320LR | 0.025 max | 19.0 - 21.0 | 32.0 - 36.0 | 2.0 - 3.0 | 1.5 - 2.0 |
###Typical Results | 0.003 | 20.1 | 33.3 | 2.4 | 1.7 |
%Si | %P | %S | %Cu | %Nb | |
Requirements AWS ER320LR | 0.15 max | 0.015 max | 0.02 max | 3.0 - 4.0 | Required8 x C / 1.0 max |
###Typical Results | 0.01 | 0.010 | 0.001 | 3.3 | 0.22 |
%C | %Cr | %Ni | %Mo | %Nb + Ta | |
Requirements AWS ER347 | 0.08 max | 19.0 - 21.5 | 9.0 - 11.0 | 0.75 max | 10 x C - 1.0 |
###Typical Results | 0.03 | 19.5 | 9.3 | 0.25 | 0.60 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER347 | 1.0 - 2.5 | 0.30 - 0.65 | 0.03 max | 0.03 max | 0.75 max |
###Typical Results | 1.7 | 0.45 | 0.01 | 0.007 | 0.10 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER385 | 0.025 max | 19.5 - 21.5 | 24.0 - 26.0 | 4.2 - 5.2 | 1.0 - 2.5 |
###Typical Results | 0.010 | 19.9 | 25.0 | 4.2 | 1.8 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER385 | 0.50 max | 0.02 max | 0.03 max | 1.2 - 2.0 | |
###Typical Results | 0.3 | 0.01 | 0.001 | 1.4 |
%C | %Cr | %Ni | %Mo | %Nb | |
Requirements AWS ER409Nb | 0.08 max | 10.5 - 13.5 | 0.6 max. | 0.50 max | 0.075 max |
###Typical Results | 0.04 | 11.5 | 0.4 | 0.03 | 0.50 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER409Nb | 0.8 max | 1.0 max | 0.04 max | 0.03 max | 0.75 max |
###Typical Results | 0.62 | 0.48 | 0.02 | 0.02 | 0.04 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER410 | 0.12 max | 11.5 - 13.5 | 0.6 max | 0.75 max | 0.6 max |
###Typical Results | 0.11 | 12.5 | 0.1 | 0.03 | 0.45 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER410 | 0.5 max | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.39 | 0.01 | 0.01 | 0.14 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS ER410NiMo | 0.06 max | 11.0 - 12.5 | 4.0 - 5.0 | 0.4 - 0.7 | 0.6 max |
###Typical Results | 0.02 | 11.7 | 4.7 | 0.5 | 0.2 |
%Si | %P | %S | %Cu | ||
Requirements AWS ER410NiMo | 0.5 max | 0.03 max | 0.03 max | 0.75 max | |
###Typical Results | 0.2 | 0.01 | 0.002 | 0.06 |
%C | %Cr | %Ni | %Mo | %Nb | |
Requirements AWS ER630 | 0.05 max | 16.00 - 16.75 | 4.5 - 5.0 | 0.75 max | 0.15 - 0.30 |
###Typical Results | 0.03 | 16.5 | 4.8 | 0.2 | 0.22 |
%Mn | %Si | %P | %S | %Cu | |
Requirements AWS ER630 | 0.25 - 0.75 | 0.75 max | 0.03 max | 0.03 max | 3.25 - 4.0 |
###Typical Results | 0.54 | 0.43 | 0.02 | 0.02 | 3.6 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements AWS ER2209 | 0.03 max | 21.5 - 23.5 | 7.5 - 9.5 | 2.5 - 3.5 | 0.5 - 2.0 | 0.90 max |
###Typical Results | 0.01 | 22.7 | 8.5 | 3.0 | 1.4 | 0.4 |
%P | %S | %N | %Cu | FN | ||
Requirements AWS ER2209 | 0.03 max | 0.03 max | 0.08 - 0.20 | 0.75 max | Not Required | |
###Typical Results | 0.01 | 0.001 | 0.15 | 0.06 | 30 - 60 |
%C | %Cr | %Ni | %Mo | %Mn | %Si | |
Requirements AWS ER2594 | 0.03 max | 24.0 - 27.0 | 8.0 - 10.5 | 2.5 - 4.5 | 2.5 max | 1.0 max |
###Typical Results | 0.02 | 24.6 | 8.6 | 3.8 | 0.8 | 0.3 |
%P | %S | %N | %Cu | %W | FN | |
Requirements AWS ER2594 | 0.03 max | 0.02 max | 0.20 - 0.30 | 1.5 max | 1.00 max | Not Required |
###Typical Results | 0.02 | 0.01 | 0.25 | 0.01 | 0.01 | 30 - 60 |
%C | %Mn | %Si | %S | %P | |
Requirements AWS ER16-8-2 | 0.10 max | 1.0-2.0 | 0.3-0.6 | 0.02 max | 0.03 max |
###Typical Results | 0.06 | 1.4 | 0.4 | 0.01 | 0.01 |
%Cr | %Ni | %Mo | %Cu | ||
Requirements AWS ER16-8-2 | 14.5-16.5 | 7.5-9.5 | 1.0-2.0 | 0.75 max | |
###Typical Results | 15.5 | 8.5 | 1.3 | 0.1 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS EC409 | 0.08 | 10.5-13.5 | 0.6 | 0.5 | 0.8 |
###Typical Results | 0.03 | 11.1 | 0.02 | 0.03 | 0.5 |
%Si | %P | %S | %Ti | ||
Requirements AWS EC409 | 0.8 | 0.03 | 0.03 | 10xC min1.5 max | |
###Typical Results | 0.6 | 0.007 | 0.008 | 1.0 |
%C | %Cr | %Ni | %Mo | %Mn | |
Requirements AWS EC439 | 0.04 | 17.0-19.0 | 0.6 | 0.5 | 0.8 |
###Typical Results | 0.03 | 17.5 | 0.02 | 0.02 | 0.47 |
%Si | %P | %S | %Ti | ||
Requirements AWS EC439 | 0.8 | 0.03 | 0.03 | 10xC min1.1 max | |
###Typical Results | 0.4 | 0.01 | 0.01 | 0.4 |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS ER308/308L | 0.03 max | 1.0-2.5 | 0.30-0.65 | 0.03 max | 0.03 max | 19.5-22.0 |
###Typical Results | 0.02 | 1.30 | 0.40 | <0.01 | 0.02 | 20.30 |
%Ni | %Mo | %Cu | %N | FN | ||
Requirements AWS ER308/308L | 9.0-11.0 | 0.75 max | 0.75 max | Not Specified | Not Required | |
###Typical Results | 10.20 | 0.16 | 0.16 | 0.02 | N/A |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS ER309/309L | 0.03 max | 1.0-2.5 | 0.30-0.65 | 0.03 max | 0.03 max | 23.0-25.0 |
###Typical Results | 0.02 | 1.60 | 0.36 | <0.01 | 0.02 | 23.80 |
%Ni | %Mo | %Cu | %N | FN | ||
Requirements AWS ER309/309L | 12.0-14.0 | 0.75 max | 0.75 max | Not Specified | Not Required | |
###Typical Results | 13.30 | 0.12 | 0.10 | 0.08 | N/A |
%C | %Mn | %Si | %S | %P | %Cr | |
Requirements AWS ER316/316L | 0.03 max | 1.0-2.5 | 0.30-0.65 | 0.03 max | 0.03 max | 18.0-20.0 |
###Typical Results | 0.02 | 1.70 | 0.37 | 0.01 | 0.02 | 19.60 |
%Ni | %Mo | %Cu | %N | FN | ||
Requirements AWS ER316/316L | 11.0-14.0 | 2.0-3.0 | 0.75 max | Not Specified | Not Required | |
###Typical Results | 11.70 | 2.10 | 0.04 | 0.02 | N/A |
On Carbon Steel | %C | %Mn | %Si | %Cr |
1 ###Layer | 4.6 | 1.2 | 0.5 | 13.8 |
2 ###Layers | 5.5 | 1.3 | 0.6 | 17.3 |
%C | %Mn | %Si | %Cr | %Ni | |
Requirements AWS A5.21 ERCCoCr-C | 2.0-3.0 | 2.0 max | 2.0 max | 25-33 | 3.0 max |
###Typical Results | 2.5 | 0.8 | 0.3 | 28.9 | 0.2 |
%Fe | %Mo | %W | %Co | Hardness, Rc | |
Requirements AWS A5.21 ERCCoCr-C | 5.0 max | 1.0 max | 11-14 | Balance | Not Required |
###Typical Results | 3.7 | 0.1 | 11.3 | 50 | 49 |
%C | %Mn | %Si | %Cr | %Ni | |
Requirements AWS A5.21 ERCCoCr-A | 0.7-1.4 | 2.0 max | 2.0 max | 25-32 | 3.0 max |
###Typical Results | 1.2 | 0.8 | 0.5 | 28.2 | 0.3 |
%Fe | %Mo | %W | %Co | Hardness, Rc | |
Requirements AWS A5.21 ERCCoCr-A | 5.0 max | 1.0 max | 3.0 -6.0 | Balance | Not Required |
###Typical Results | 3.9 | 0.1 | 4.1 | 58 | 40 |
%C | %Mn | %Si | %Cr | %Ni | |
Requirements AWS A5.21 ERCCoCr-B | 1.2-2.0 | 2.0 max | 2.0 max | 25-32 | 3.0 max |
###Typical Results | 1.5 | 0.9 | 1.0 | 27.4 | 0.2 |
%Fe | %Mo | %W | %Co | Hardness, Rc | |
Requirements AWS A5.21 ERCCoCr-B | 5.0 max | 1.0 max | 7-10 | Balance | Not Required |
###Typical Results | 3.9 | 0.1 | 8.4 | 53 | 45 |
%C | %Mn | %Si | %Cr | %Ni | |
Requirements AWS A5.21 ERCCoCr-E | 0.15-0.40 | 2.0 max | 1.5 max | 25-30 | 1.5 -4.0 |
###Typical Results | 0.25 | 0.7 | 0.6 | 27.5 | 2.1 |
%Fe | %Mo | %W | %Co | Hardness, Rc | |
Requirements AWS A5.21 ERCCoCr-E | 5.0 max | 4.5-7.0 | 0.50 max | Balance | Not Required |
###Typical Results | 3.9 | 5.5 | 0.1 | 59 | 24 |
%C | %Mn | %Si | %Mo | |
6 ###Layers - Under 801 or 802 | 0.11 | 2.5 | 0.40 | 0.50 |
6 ###Layers - Under 860 | 0.11 | 2.7 | 0.60 | 0.50 |
%C | %Mn | %Si | %Cr | %Mo | %Ni | |
2 ###Layers w/ 802 | 0.05 | 2.20 | 0.60 | 1.80 | 0.33 | 0.07 |
2 ###Layers w/ 802 | 0.13 | 2.11 | 0.51 | 1.63 | 0.30 | 0.09 |
%C | %Mn | %Si | %Cr | %Mo | |
###Typical Results | 0.19 | 1.7 | 0.60 | 2.3 | 0.50 |
%C | %Mn | %Si | %Cr | %Mo | |
###Typical Results | 0.12 | 2.75 | 0.50 | 3.30 | 0.85 |
%C | %Mn | %Si | %Cr | %Mo | |
1 ###Layer | 0.14 | 2.13 | 0.34 | 1.45 | 0.43 |
2 ###Layers | 0.12 | 2.70 | 0.39 | 2.22 | 0.66 |
4 ###Layers | 0.11 | 3.33 | 0.442.95 | 0.84 | |
6 ###Layers | 0.10 | 3.51 | 0.46 | 3.20 | 0.80 |
%C | %Mn | %Si | %Cr | %Ni | %Mo |
0.05 | 0.60 | 0.40 | 1.40 | 2.40 | 0.40 |
%C | %Mn | %Si | %Cr | %Mo |
0.12 | 1.10 | 0.30 | 0.80 | 0.20 |
%C | %Mn | %Si | %Cr | %Ni | %Mo |
0.09 | 0.80 | 0.30 | 0.45 | 0.55 | 0.15 |
%C | %Mn | %Si | %Cr | %Ni |
0.08 | 0.80 | 0.40 | 12.50 | 0.20 |
%C | %Mn | %Si | %Cr | %Ni | %Mo |
0.05 | 0.80 | 0.50 | 13.00 | 2.00 | 1.00 |
%C | %Mn | %Si | %Cr | %Ni | %Mo | %V |
0.15 | 1.20 | 0.40 | 11.50 | 2.00 | 1.00 | 0.15 |
%C | %Mn | %Si | %Cr | %Ni | %Mo | %V |
0.15 | 1.20 | 0.40 | 13.50 | 2.00 | 1.00 | 0.15 |
%C | %Mn | %Si | %Cr |
0.20 | 1.20 | 0.50 | 12.00 |
%C | %Mn | %Cr | %Si | %Mo | %Ni | %N | Avg HRC |
0.06 | 1.20 | 12.6 | 0.40 | 1.60 | 3.50 | 0.09 | 43 |
%C | %Mn | %Cr | %Si | %Mo | %Ni | %V | %W | %N | Avg HRC |
0.06 | 1.86 | 11.70 | 0.62 | 1.40 | 3.70 | 0.29 | 0.27 | 0.08 | 42 |
%C | %Mn | %Si | %Cr |
0.23 | 1.20 | 0.40 | 13.00 |
%C | %Mn | %Si | %Cr | %Mo | %V | %W |
0.28 | 1.50 | 0.40 | 6.50 | 1.00 | 0.15 | 1.00 |
%C | %Mn | %Si | %Cr | %Mo | %V | %W |
0.40 | 2.10 | 1.60 | 6.70 | 1.60 | 0.20 | 1.30 |
On Carbon Steel | %C | %Mn | %Si | %Cr | %Mo |
4 ###Layers | 0.08 | 1.60 | 0.50 | 0.90 | 0.30 |
%C | %Mn | %Si | %Cr | %Mo | |
###0.045 in (1.1 mm) - Ar/CO2 | 0.39 | 1.24 | 0.75 | 5.61 | 0.55 |
###0.045 in (1.1 mm) - Ar/O2 | 0.47 | 1.45 | 0.95 | 6.44 | 0.65 |
###1/16 in (1.6 mm) - Ar/CO2 | 0.41 | 1.24 | 0.75 | 5.3 | 0.57 |
###1/16 in (1.6 mm) - Ar/O2 | 0.45 | 1.25 | 0.95 | 5.5 | 0.58 |
%C | %Mn | %Si | %Al | |
6 ###Layers | 0.24 | 0.50 | 0.25 | 1.50 |
%C | %Mn | %Si | %Al | %Cr | %S | %P | |
3 ###Layers (0.045 in & 1/16 in) | 0.11-0.18 | 1.8-2.1 | 0.50-0.75 | 1.6-1.9 | 1.2-1.4 | 0.002-0.005 | 0.004-0.012 |
3 ###Layers (5/64 in & 7/64 in) | 0.13-0.15 | 2.1-2.3 | 0.45-0.60 | 1.45-1.70 | 1.1-1.4 | 0.002-0.005 | 0.004-0.008 |
%C | %Mn | %Si | %Al | %Cr | %Mo | |
1 ###Layer | 0.18 | 1.25 | 0.53 | 1.34 | 2.51 | 0.32 |
2 ###Layers | 0.20 | 1.46 | 0.67 | 1.72 | 3.25 | 0.42 |
3 ###Layers | 0.21 | 1.55 | 0.76 | 1.97 | 3.52 | 0.46 |
%C | %Mn | %Si | %Al | %Cr | %Mo | %S | %P | |
###0.045 in & 1/16 in | 0.45 | 1.3 | 0.53 | 1.4 | 5.3 | 0.80 | 0.004 | 0.010 |
###5/64 in & 7/64 in | 0.45 | 1.4 | 0.60 | 1.4 | 5.3 | 0.80 | 0.004 | 0.010 |
%C | %Mn | %Si | %Al | %Cr | %Mo | %W | |
6 ###Layers Open Arc | 0.65 | 1.5 | 0.8 | 1.8 | 7.0 | 1.4 | 1.6 |
6 ###Layers w/ 802 Flux | 0.50 | 1.9 | 1.0 | 1.0 | 7.0 | 1.4 | 1.6 |
%C | %Mn | %Si | %Cr | %Ni | |
###Open Arc | 0.60 | 13.0 | 0.4 | 4.9 | 0.5 |
%C | %Mn | %Si | %Cr | |
6 ###Layers Open Arc | 0.4 | 15.0 | 0.25 | 16.0 |
6 ###Layers w/ 801 Flux | 0.4 | 15.0 | 0.6 | 16.0 |
%C | %Mn | %Si | %Cr | |
6 ###Layers | <2 | <30 | <1 | <10 |
%C | %Mn | %Si | %Cr | %Mo | %Ni | %Al | |
4 ###Layers | <1 | <5 | <2 | <5 | <1 | <3 | <3 |
%C | %Mn | %Si | %Al | %Cr | %Mo | |
###0.045 in & 1/16 in2.4 | 1.3 | 1.0 | 0.6 | 11.4 | - | |
###5/64 in & 7/64 in | 2.0 | 0.9 | 1.0 | 0.6 | 9.2 | 0.5 |
###w/ 801 Flux | 2.5 | 1.1 | 1.3 | 0.4 | 10.1 | 0.5 |
###w/ 860 Flux | 2.5 | 2.0 | 1.7 | 0.2 | 11.0 | 0.5 |
%C | %Mn | %Si | %Al | %Cr | |
2 ###Layers Open Arc | 3.7 - 4.3 | 0.8 - 0.9 | 0.8 - 1.0 | 0.3 - 0.4 | 20.0 - 21.3 |
2 ###Layers w/ 802 Flux | 3.6 - 4.0 | 1.0 - 1.1 | 1.0 - 1.1 | 0.2 -0.3 | 17.4 - 18.5 |
%Fe | %C | %Cr | %Mn | %Si | %Al |
Balance | <10 | <35 | <5 | <2 | <1 |
%C | %Mn | %Si | %Cr | |
1 ###Layer | 3.7 | 1.3 | 0.7 | 19.9 |
2 ###Layers | 4.9 | 1.6 | 1.0 | 26.2 |
4 ###Layers | 5.7 | 1.8 | 1.1 | 30.8 |
%Fe | %C | %Cr | %B | %Mo | %Mn | %Si | %Al |
Balance | <10 | <35 | <5 | <2 | <5 | <2 | <1 |
%Fe | %C | %Cr | %B | %Mo | %Mn | %Si | %Nb | %Al |
Balance | <10 | <35 | <5 | <2 | <5 | <2 | <2 | <1 |
%Fe | %C | %Cr | %B | %Mo | %Mn | %Si | %Nb | %Al |
Balance | <10 | <35 | <5 | <2 | <5 | <2 | <10 | <1 |
%Fe | %C | %Cr | %B | %Mo | %Mn | %Si | %Nb | %Al |
Balance | <10 | <35 | <5 | <2 | <5 | <2 | <10 | <1 |
%Fe | %C | %Cr | %B | %Mo | %Mn | %Si | %Al |
Balance | <10 | <35 | <5 | <2 | <5 | <2 | <1 |
%Fe | %C | %Cr | %V | %Mo | %Mn | %Si | %Ti | %Al |
Balance | <5 | <15 | <2 | <5 | <5 | <5 | <20 | <1 |
%Fe | %C | %Cr | %B | %Mo | %Nb | %Mn | %Si |
Balance | <2 | <21 | <7 | <6 | <6 | <2 | <2 |
%Fe | %C | %Cr | %B | %Nb | %Al | %Mn | %Si |
Balance | <3 | <18 | <6 | <10 | <5 | <2 | <2 |
%Fe | %C | %Cr | %W | %B | %Mo | %Nb | %Mn | %Si | %Al |
Balance | <5 | <20 | <10 | <5 | <10 | <10 | <5 | <2 | <5 |
%Fe | %C | %Cr | %B | %Nb | %Mn | %Si |
Balance | <3 | <10 | <6 | <9 | <5 | <2 |
%Fe | %C | %Cr | %B | %Mo | %W | %Ti | %Mn | %Si |
Balance | <2 | <20 | <5 | <4 | <6 | <3 | <4 | <2 |
%Fe | %C | %Cr | %B | %Nb | %Mn | %Si |
Balance | <3 | <10 | <6 | <9 | <5 | <2 |
%Fe | %C | %Cr | %B | %Mo | %W | %Mn | %Si |
Balance | <2 | <25 | <5 | <15 | <5 | <2 | <2 |
%Fe | %C | %Cr | %B | %Mo | %Nb | %Mn | %Si |
Balance | <2 | <22 | <5 | <5 | <5 | <1 | <1 |
%Fe | %C | %Cr | %B | %Mo | %Nb | %W | %Mn | %Si |
Balance | <4 | <25 | <5 | <6 | <12 | <15 | <3 | <2 |
%Fe | %C | %Cr | %B | %Mo | %Mn | %Si | %W |
Balance | <3 | <25 | <5 | <20 | <5 | <2 | <10 |
%Fe | %C | %Cr | %B | %Mo | %Nb | %Mn | %Si | %W |
Balance | <4 | <25 | <5 | <6 | <12 | <3 | <2 | <12 |
%Fe | %C | %Cr | %B | %Mo | %Nb | %W | %Mn | %Si |
Balance | <4 | <25 | <5 | <6 | <12 | <15 | <3 | <2 |
%Fe | %C | %Cr | %B | %Mo | %Nb | %W | %Mn | %Si | %V |
Balance | <5 | <20 | <10 | <10 | <10 | <15 | <5 | <2 | <5 |
%Fe | %C | %Cr | %B | %Nb | %Mn | %Si |
Balance | <2 | <21 | <7 | <6 | <2 | <2 |