The specification of this wire posted on the website, its chemical composition, and technological parameters have not yet been approved by the specialists of our company. If you are interested, please contact us.
|
NAME
|
CLASSIFICATION INDEXES
|
TUU 19369185.002-96
|
|
FCW-AS29
|
Diametr: 1,2-2,6 mm Protection: shielding gas
Design: tubular, overlapping
|
Purpose and scope
Предназначена для механизированной сварки металлоконструкций из малоуглеродистых сталей по ГОСТ 380 и низколегированных сталей по ГОСТ 19281, втом числе эксплуатации при низких температурах. Применяется также для заварки дефектов литья из углеродистых и легированных конструкционных сталейм (15Л - 35Л, 20ГЛ, 20ГСЛ, 20Г1ФЛ, 30ГСЛ, 35ГЛ и др. им подобных) по ГОСТ 977. Типичные объекты применения: строительные металлоконструкции, транспортное машиностроение, узлы дорожных и строительных машин, элементов грузоподъемных устройств и т.п.
Welding and technological properties
-
Arc Stability - consistent and stable arc behavior, good weld bead appearance.
-
Slag completely covers the weld bead, and easy to remove slag. High crack and pore resistance.
-
Shielding gas.: 100% CO2
Welding technology
-
Welding in the lower position is performed at the location of the wire perpendicular to the weld bead or tilt «angle back».
-
It is possible to weld multi-layer welds without removing slag when making 3 layers.
-
Use DC reverse polarity.
Deposit composition (Weld metal), %
| C | Si | Mn | S | P |
| 0.08 | 0.3 | 1.3 | ≤0.03 | ≤0.03 |
_
Welding Alloys Analog
| Brand of the wire |
Distance, % |
virobnik | C | Mn | Si |
| ROBOFIL B 71 (56) | 0.15 | Welding Alloys | 0.06 | 1.4 | 0.4 |
| ROBOFIL R 71+ (52) | 0.15 | Welding Alloys | 0.04 | 1.2 | 0.4 |
| ROBOFIL KX71T1+ (53) | 0.21 | Welding Alloys | 0.05 | 1.3 | 0.5 |
| ROBOFIL M 71 (55) | 0.23 | Welding Alloys | 0.07 | 1.4 | 0.5 |
| ROBOFIL M 70 (54) | 0.41 | Welding Alloys | 0.05 | 1.5 | 0.65 |
Typical mechanical properties of the weld metal
|
Ultimate tensile strength, MPa |
Yield Strength, MPa |
Elongation (l = 5×d), % |
Impact strength, KCV, J/cm2 at T °C |
|
minimum
|
+20°
|
-20°
|
-40°
|
|
520 |
460 |
22 |
≥80 |
- |
≥35 |
Modes of the welding process
|
Wire diameter, mm
|
Current, A
|
Voltage, V
|
Wire overhang, mm
|
Gas consumption
CO2,
л/мин
|
|
1,2-1,4
|
80-300
|
20-28
|
15-20
|
5-14
|
|
1,6-1,8
|
120-350
|
22-32
|
15-25
|
5-16
|
|
2,0-2,2
|
150-400
|
24-34
|
15-25
|
6-18
|
|
2,5*
|
200-500
|
26-36
|
15-30
|
8-20
|
Weld Positions
Ø 1,2-1,8 мм:
Ø 2,0-2,2 мм:
Ø 2,5 мм:
Delivery type (More)
|
The diameter of the wire
|
1,2–2,0 mm
|
2,4–3,2 mm
|
1,6–6,0 mm
|
|
Delivery |
Magazine
B-300; S-300
|
Molded Bay
|
Bay
|
|
Standard package |
cardboard box |
cartons |
metal drums |
metal drums |
|
Weight, kg |
10-15
|
20-55
|
50-70
|
50-70
|
Articles and website pages that mention this wire
There are no articles in this language
