Порошковая проволока ВЕЛТЕК-Н585 (ООО «ТМ.ВЕЛТЕК»). ТУУ 28.7-31749248-005-2003

The specification of this wire posted on the website, its chemical composition, and technological parameters have not yet been approved by the specialists of our company. If you are interested, please contact us.

WELTEC-H610

TUU 28.7-31749248.002-2002
(suspended)

EN 14700/ T Fe4

DIN 8555/ MF6-GF-60-ST (suspended)

Welding process: О – open arc G – in shielding gas	Wire diameter, mm	Recommended shielding gases and fluxes
О	1,6-3,2	-
G	1,6-2,6	С1 (100% СО₂), М21 (18% СО₂ + 82% Ar)

General characteristics

Твердость наплавленного металла в третьем слое (без предварительного подогрева, межпроходная температура ≤200˚С) HRC 55–60

Application

Weldability

The Formation of the weld bead	good
Separation of Slag	good, solid crust no
Deposition Rate, kg/h	5-11
Addiction Weld metal Cracking	moderate
Consumption per 1 kg of wire Weld metal, kg	1.1-1.25
Weld metal Hardness (HRC for 3rd-4th layer, unless otherwise stated)	after surfacing 59-63

Technological features

Properties of the weld metal

Deposit composition (Weld metal), %

C	Mn	Si	Cr	Mo	V	W	B	S	P
1.0	0.5	0.6	5.0	7.8	1.2	2.0	0.7	<0.03	<0.03

Welding Alloys Analog

Brand of the wire	Distance, %	virobnik	C	Mn	Si	Cr	Mo	W	V	Ti	Ni	P	S
HARDFACE AR (27)	0.84	Welding Alloys	1.1	0.5	0.5	4.9	7.5	2.3	1.1
ROBOTOOL 46-G (19)	5.13	Welding Alloys	0.2	0.9	0.5	6	3.5			0.25
ROBOTOOL 54W-G (18)	5.13	Welding Alloys	0.4	0.9	0.6	5.9	3	3.1	1	0.2	0.4	0.02	0.02
ROBOTOOL 47-G (20)	5.14	Welding Alloys	0.15	0.9	0.5	6	3.5			0.25
ROBOTOOL 49W-G (17)	5.22	Welding Alloys	0.3	0.9	0.6	5.8	2.8	2.3	0.9	0.2	0.5	0.03	0.03

Recommended Surfacing Modes

Wire diameter, mm	Welding process:	Current, A	Voltage, V	Surfacing rate, m/h	Gas consumption l/min
1,6	O	140 - 240	24 - 28	10 - 15
1,6	G	120 - 320	23 - 32	10 - 15	7 – 15
2,0	O	160 - 260	25 - 28	12 - 18
2,0	G	150 - 400	24 - 34	12 - 18	8 - 16
2,4	O	200 - 320	26 - 29	15 - 20
2,4	G	180 - 450	25 - 36	15 - 20	10 - 18
2,8	O	240 - 360	26 - 30	18 - 23
3,0	O	260 - 400	26 - 30	18 - 23

Accordance with the analogues («TM.ESAB», «TM.BÖHLER», «TM.WELDING ALLOYS»)

Type of «TM.BÖHLER»: UTR 690
Type of «TM.WELDING ALLOYS»: ROBODUR K AR

Delivery type (More)

Диаметр, мм	Cardboard barrel			Molded skeins of frameless type		Frame drum (B)	Coil (S), (BS)
	Cardboard barrel			Hank in the corrugation box	Metallic barrel	Frame drum (B)	Coil (S), (BS)
	To 100 kg	To 150 kg	To 300 kg	To 30 kg	To 70 kg	To 25 kg	To 15 kg
2.0	X	X	X	X	X	X	X
2.4	X	X	X	X	X	X	X
2.8	X	X	X	X	X	X
3.0	X	X	X	X	X	X
3.2	X	X	X	X	X	X
3.6	X	X	X	X	X	X

There are no articles in this language