The specification of this wire posted on the website, its chemical composition, and technological parameters have not yet been approved by the specialists of our company. If you are interested, please contact us.
|
NAME
|
CLASSIFICATION INDEXES
|
TUU 28.7-31749248.002-2002
(suspended)
|
|
Wet-FCWw-TMW11
|
Diametr: 2,4–3,0 mm EN ISO 17632-A:
Т CrNiMn15 U N 3
Т Z 2 M21 3 AWS A5.20:
ECrNiMn15T0-3
ECCrNiMn15 Protection: self-shielding Type - rutile-fluorite
Design: tubular, overlapping
|
Purpose and scope
Предназначена для механизированной сварки (и наплавки) малоуглеродистых сталей ГОСТ 380, низколегированных сталей ГОСТ 19281, а также легированных конструкционных сталей ГОСТ 4543 с аустенитными сталями ГОСТ 5632. Пример комбинированных соединений из сталей 110Г13Л + 30Г, 45Г17Ю3 + 45Г17Ю3, 110Г13Л + Ст3, 110Г13Л + 12Х18Н10Т, 12Х18Н10Т + Ст3, 12Х18Н10Т + 30ХГСА. Рекомендуется для сварки металла толщиной более 5 мм.
Welding and technological properties
-
Arc Stability - consistent and stable arc behavior, good weld bead appearance. The wire provides deep penetration of the base metal.
-
Slag completely covers the weld bead, and easy to remove slag. , separability in deep cuts satisfactory. High crack and pore resistance.
Welding technology
-
Welding in the lower position is performed at the location of the wire perpendicular to the weld bead or tilt «angle back».
-
Welding of rust-coated and gas-treated or plasma-cut edges is not allowed.
-
Use DC reverse polarity.
Deposit composition (Weld metal), %
| C | Si | Mn | Ni | S | P | Cr |
| 0.1 | 0.1 | 15.0 | 9.0 | ≤0.025 | ≤0.025 | 10.0 |
_
Welding Alloys Analog
| Brand of the wire |
Distance, % |
virobnik | C | Mn | Si | Cr | Ni | S | P |
| HARDFACE AP (1) | 9.18 | Welding Alloys | 0.35 | 14 | 0.7 | 15 | 1.4 | | |
| TUBE S 307-S (159) | 12.1 | Welding Alloys | 0.07 | 7 | 0.8 | 19 | 8 | | |
| TRI S RW-O (130) | 12.41 | Welding Alloys | 0.1 | 6.5 | 1 | 19 | 9 | 0.01 | 0.02 |
| TRI S 307-O (122) | 12.43 | Welding Alloys | 0.03 | 6.5 | 0.8 | 19 | 8.2 | 0.008 | 0.02 |
| HARDFACE 19 9 6 (0) | 12.73 | Welding Alloys | 0.1 | 6 | 0.5 | 19 | 9 | | |
Typical mechanical properties of the weld metal
|
Ultimate tensile strength, MPa |
Yield Strength, MPa |
Elongation (l = 5×d), % |
Impact strength, KCV, J/cm2 at T °C |
|
minimum
|
+20°
|
-40°
|
|
|
520 |
360-400 |
30 |
≥70 |
≥50 |
|
Modes of the welding process
|
Wire diameter, mm
|
Current, A
|
Voltage, V
|
Gas consumption
CO2,
л/мин
|
Gas consumption
Аr+CO2,
л/мин
|
Wire overhang, mm
|
|
2,0-2,2
|
180-280 (140-320)*
|
24-27 (22-29)*
|
7-16
|
6-13
|
15-25
|
|
2,4-2,6
|
220-360 (160-400)
|
25-28 (24-32)
|
8-18
|
7-14
|
15-30
|
|
2,8-3,0
|
260-400 (200-450) |
26-29 (25-34)
|
9-20
|
7-16
|
20-35
|
* Protective gas welding modes are given in brackets
Weld Positions
Ø 2,0-2,2 мм:
Ø 2,4-3,0 мм:
Delivery type (More)
|
The diameter of the wire
|
1,2–2,0 mm
|
2,4–3,2 mm
|
1,6–6,0 mm
|
|
Delivery |
Magazine
B-300; S-300
|
Molded Bay
|
Bay
|
|
Standard package |
cardboard box |
cartons |
metal drums |
metal drums |
|
Weight, kg |
10-15
|
20-55
|
50-70
|
50-70
|
Articles and website pages that mention this wire
