Порошковая проволока ВЕЛТЕК-Н585 (ООО «ТМ.ВЕЛТЕК»). ТУУ 28.7-31749248-005-2003

The specification of this wire posted on the website, its chemical composition, and technological parameters have not yet been approved by the specialists of our company. If you are interested, please contact us.

WELTEC-H605

TUU 28.7-31749248.002-2002
(suspended)

EN 14700/ T Fe8

DIN 8555/ MF6-GF-60-G (suspended)

Welding process: О – open arc G – in shielding gas	Wire diameter, mm	Recommended shielding gases and fluxes
О	1,6-3,2	-
G	1,6-2,6	С1 (100% СО₂), М21 (18% СО₂ + 82% Ar)

General characteristics

Твердость наплавленного металла в третьем слое (без предварительного подогрева, межпроходная температура ≤200˚С) HRC 55–60

Application

Weldability

The Formation of the weld bead	good
Separation of Slag	good, solid crust no
Deposition Rate, kg/h	5-11
Addiction Weld metal Cracking	moderate
Consumption per 1 kg of wire Weld metal, kg	1.1-1.25
Weld metal Hardness (HRC for 3rd-4th layer, unless otherwise stated)	after surfacing 59-63

Technological features

Properties of the weld metal

Deposit composition (Weld metal), %

C	Mn	Si	Cr	Mo	V	Ti	B	S	P
1.8	0.9	0.6	8.0	1.0	0.3	2.0	0.7	<0.03	<0.03

Welding Alloys Analog

Brand of the wire	Distance, %	virobnik	C	Mn	Si	Cr	Mo	Ti	Al	Ni	Cu	S	P	Nb	V	N	W
ROBOTOOL 58-G (21)	2.85	Welding Alloys	0.35	1.2	0.5	7	2.2	0.3
ROBODUR K 600-G (12)	3.23	Welding Alloys	0.5	1.2	0.7	6	0.7
HARDFACE L (9)	3.39	Welding Alloys	0.5	1.5	2.5	8.5
ROBOFIL B P91 (75)	3.4	Welding Alloys	0.12	0.7	0.3	10	1		0.002	0.3	0.05	0.005	0.007	0.06	0.23	0.05
HARDFACE W (23)	3.57	Welding Alloys	0.55	2	0.9	6.5	1.7										1.6

Recommended Surfacing Modes

Wire diameter, mm	Welding process:	Current, A	Voltage, V	Surfacing rate, m/h	Gas consumption l/min
1,6	O	140 - 240	24 - 28	10 - 15
1,6	G	120 - 320	23 - 32	10 - 15	7 – 15
2,0	O	160 - 260	25 - 28	12 - 18
2,0	G	150 - 400	24 - 34	12 - 18	8 - 16
2,4	O	200 - 320	26 - 29	15 - 20
2,4	G	180 - 450	25 - 36	15 - 20	10 - 18
2,8	O	240 - 360	26 - 30	18 - 23
3,0	O	260 - 400	26 - 30	18 - 23

Delivery type (More)

Диаметр, мм	Cardboard barrel			Molded skeins of frameless type		Frame drum (B)	Coil (S), (BS)
	Cardboard barrel			Hank in the corrugation box	Metallic barrel	Frame drum (B)	Coil (S), (BS)
	To 100 kg	To 150 kg	To 300 kg	To 30 kg	To 70 kg	To 25 kg	To 15 kg
2.0	X	X	X	X	X	X	X
2.4	X	X	X	X	X	X	X
2.8	X	X	X	X	X	X
3.0	X	X	X	X	X	X
3.2	X	X	X	X	X	X
3.6	X	X	X	X	X	X

Articles and website pages that mention this wire

Production of flux-cored wires in «TM.VELTEK» company
The close cooperation with leading research centers, including those in the field of welding and a high professionalism of engineering and technical staff and workers allowed mastering a stable classical technology of production of welding and surfacing flux-cored wires and wires for electric arc spraying to perfection. Over the period of work of the company the complex of measures on repair and modernization of basic equipment, in particular, the production lines for fluxcored wires and the charge division, was realized. The modern types of products delivery were mastered. The technologies of manufacturing flux-cored wires of diameters from 1.0 to 6.0 mm were updated.